[jit]

guys can you help with wiring a Astra mk3 GSI speedo into a Astra Mk2 GTE loom??? (i.e replacing digidash with analogues)

pins and wire colours below....(any pin numbers missing denotes no wire there)

GTE (BLACK connector)
1. black/green
3. brown/white
6. brown/yellow
9. black
11. brown/blue
12. black
13. white/yellow
14. yellow
15. brown
16. black/white

GTE (WHITE connector)
1. blue/white
3. grey/green
4. black/blue
5. black
7. green
9. brown
10. brown
11. brown
12. blue/yellow
15. black
16. grey/green
17. blue
21. blue/red
22. blue/green


GSI Connector 1
6. white/green
8. brown/yellow
10. brown/purple
12. black/blue

GSI Connector 2
2. blue/white
3. blue/red
4. brown
5. black/grey (doubled up)
6. blue
7. black/blue
8. green
9. black
10. brown/red
11. brown/white
12. brown/blue (doubled up)
13. black/white
14. black
15. blue/green
16. white

thanks for any help guys
Much appreciated

 

[LEE69]

this should help you

 

[Andy K]

Match all the colours below except for one with notes against them.

GTE (BLACK connector)
1. black/green TO BLACK/GREEN/WHITE
3. brown/white
6. brown/yellow
9. black
11. brown/blue
12. black TO WHITE/GREEN
13. white/yellow NOT CONNECTED
14. yellow it's WHITE
15. brown
16. black/white TO THE BLACK NEXT TO THE BLACK/GREEN/WHITE DOT ON THE MK3 CONNECTOR only

GTE (WHITE connector)
1. blue/white
3. grey/green TO GREY/BLACK
4. black/blue
5. black
7. green
9. brown
10. brown
11. brown
12. blue/yellow OIL PRESSURE GAUGE
15. black
16. grey/green NOT CONNECTED
17. blue
21. blue/red
22. blue/green


GSI Connector 1
10. brown/purple NOT CONNECTED
12. black/blue REAR FOGS

 

[jit]

Cheers Guys, just a couple of questions if you don't mind Andy, Thanks...

Match all the colours below except for one with notes against them.

GTE (BLACK connector)
1. black/green TO BLACK/GREEN/WHITE
16. black/white TO THE BLACK NEXT TO THE BLACK/GREEN/WHITE DOT ON THE MK3 CONNECTOR only
I assume you mean to pin 13 and 14 on GSI connector?

GTE (WHITE connector)
12. blue/yellow OIL PRESSURE GAUGE
Where can I find the oil pressure Gauge


GSI Connector 1
12. black/blue REAR FOGS
When you say Rear Fogs do you mean the switch? if so which pin or wire colour?

Andy you have been a life saver in terms of help, your How2's are also really good...

Cheersb

 

[Andy K]

answer the other question later.


rear fogs - to the same colour wire on the switch.

Your mk3 clocks don't have an oil pressure gauge so you won't have one. leave the wire disconnected.

 

[jit]

cheers geeza

 

[Andy K]

"I assume you mean to pin 13 and 14 on GSI connector? "

Yes.

 

[jit]

nice one Andy, help much appreciated, I might be bugging you again when fitting the GSI trip comp in the mk2 Astra but got your amended instructions so should be ok!!!

thanks again mate :beer:

 

[Andy K]

As this is getting a popular mod I have done a How2

how2

 

[jit]

nice one... one final question though andy....

when replacing LCD for Analogue clocks, I assume I have to attach a Speedo Cable?
As most GTE's had The LCD dash as standard, would the speedo cable still be in the car?

Do i need to attach it?

I'm Confused

 

[Andy K]

Nope, the mechanical speedo cable won't be in the GTE.

You will need to get one and fit it.

 

[jit]

okey dokey....
Any hints on which vaux's I can get them from?
I have a F16 gearbox if thats any help....

 

[jit]

I've also got a mk3 GSI wiring loom. could i use the one on there?

 

[Andy K]

You want a mechanical speedo cable off a Mk3 astra.

It's not part of the wiring loom itself.

 

[jit]

ok - thanks for all your help....

[to the wanted section I go]