Vauxhall Owners Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
19,143 Posts
Discussion Starter · #1 ·
Can anyone give me some advice on how to do this. It is a small split about an inch and a half long on the curved part where the bumper wraps round the wing.

Halfords do a kit but I don't want to spend 25 quid on it if it is little more than a tube of epoxy filler.

Thanks.
 

·
Registered
Joined
·
11,480 Posts
What i've done in the past

1. rub down the rear with rough sandpaper

2. use a soldering iron to seam it back together

3. Screw a piece of mesh over from behind

4. P40 the bugger

5. Turn bumper around, grind screw threads off, fill, prime, and paint

Its the only way I could stop it coming back
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top