Sip 130 Mig Welder

[bjr]

Anyone got one of these? I need a bit of help with mine

[Trevor]

What is the problem?

[bjr]

need to know what order the power switches go
it has 3 switches, hi/lo is obvious, but what order to the others go in relation to moving the power up and down

[DarrenH]

wire speed and power aint it ?

[cavgsi]

ye, probably a coarse + fine adjustment for power + the wire speed

[TomF]

Is it the Migmate 130 turbo ? if so I`ve got this welder and the switches go like this,
high mode : max switch down = max power
max switch up/ med switch up = Medium power
max switch up/ med switch down = min power

low mode only has 1 setting: low.

[bjr]

I aint stupid!
need to know what order the switches are for the fine power adjustment

[cavgsi]

sorry i misread, i thought it was knobs, not switched

probasbly as above ^

[bjr]

Is it the Migmate 130 turbo ? if so I`ve got this welder and the switches go like this,
high mode : max switch down = max power
max switch up/ med switch up = Medium power
max switch up/ med switch down = min power

low mode only has 1 setting: low.

thats what I thought
but why have 6 switch positions for 3 power settings?
I aint used to these cheap welders! I like a power knob and a wire feed knob!