the barge goes in for paint the week of billing.....

[mystery machine]

yep, goes in monday, comes out on wednesday. having the front bumper done cos the muppet that last had it tried to blow in 1 corner after a scrape which looks...very beginer like in its finish and 2 small rust areas, one on the drivers door and one on the rear door, total area of one square inch. so it'll look the muts for billing, shame i wont be getting the wheels though i still aint got my rta money yet so it'll have to be the minimum done for the show. also have to re wire the video and ps2 as the 15" is takin up so much in height of the boot the video had to be removed. i also need to get the brake disc's into a machine shop as they have warped so i'll get the warp skimmed out of them (i hate that when it happens to new disc's) especially at 120 notes for the fronts

so who else is leaving it til the last minute for the show and what r u getting done?

gav.

[THE CAVMAN]

1 or 2 minor mods being done for Billing !!! lmao lmao lmao .........should slightly change the appearance of the Omega !!!

[mystery machine]

quite obviously being secretive about this will be nice to put a face to a name and swop ideas like over a or two of course, the nations finest truth serum lmao the more u drink....the more bo**cks u talk

gav.

[THE CAVMAN]

Sounds good for me mate ......see you at Billing !!! lmao lmao

[mystery machine]

rang round for my wheels today and found some 8x17's wrapped in 235/40 rubber for a grand. these are merc fitment and have longer bolts that need fitting, 35mm offset will fill the arches a bit better, so mr solisitor man where the fook is mi cheque!!!!!!!!

gav.

[garethbowers]

mark y not get a loan till ur cheque comes through then just settle it!!!!! i did then sold me bluddy car still got the feckin wheels in the loft...sadly they were ford fitment

[mystery machine]

never again, it feels so much better when ur account is loaded. looked in fast car todaybig mistake!!!!!! i saw a load of other wheels that i liked and some at better money.... cant decide.....help!!!!

gav.

[SKAMAN]

Elite I'm in near dartford in kent and I need the rustsy edge of my calibra's bonnet seeing to can you recomend a good place and give me an idea of the cost of the work as i see your in kent as well.. soz to hijack the thread

[mystery machine]

he has a place in erith and is very very good.

gav.

[SKAMAN]

No problem erith is only a mile or so away from me....

a name a number if you would please

[mystery machine]

if you go down manor road from the queens road end there is an industrial part afterthe houses, now i aint been there yet but aparently its near a yard with two white balls near the gates it is very near there that is all i can tell you as i say i havnt been there but my mate had his merc done in there (hes very particular about his car) and says u cant even see the difference in the paintwork...and its metalic, for blowing in a scratch (his misses reversed into a wall ) he got charged 80 or 90 quid cant remember exactly the price but cheap and good finish....cant go wrong. if its local have a scoot around, if i'm passing (not on a call cos its difficult to write a numer down doin 50+ )i'll put it up for ya.

gav.

[SKAMAN]

thanks mate i think i know where you mean