Lockwood dials on PVD website.........

[Adam]

Lockwood dials

Cavalier Mk 3 speedo 10-140, no rev counter 40RRR £43.95
Cavalier Mk 3 speedo 10-140, rev counter 0-7 400BB/S £44.95
Cavalier Mk 3 speedo 10-140, rev counter 0-8 400BB/S £44.95
Cavalier Mk 3 speedo 10-160, rev counter 0-8 400QQ £44.95
Cavalier Mk 3 speedo 10-160, rev counter 0-7 400VV £44.95
Cavalier Mk 3 speedo 10-160, rev counter 0-8 400VV £44.95

is it possible to stick on the 10-160 revs 0-8 on a cav gsi..then maybe u can see past the original 140mph on your standard clock? i know the revs are the same then...hmmmmmm

[dragonlord]

adam you dont work for PV by any chance do you :-)

[Adam]

lmao
no!

[Vauxnova]

Originally posted by dragonlord
adam you dont work for PV by any chance do you :-)

i was thinking the exact same thing

[Tom Williams]

adam the cavalier isnt calibrated to read the 160 clocks your speedo will be out all the way from 0-140 and the gsi uses the 8k clockas

[Adam]

Tom Williams adam the cavalier isnt calibrated to read the 160 clocks your speedo will be out all the way from 0-140 and the gsi uses the 8k clockas

thats what im saying tom...if u can use the 8000 revs and say a 160mph clock, then maybe u can see what u car goes like when it hits past 140...which im sure everyones else cav gsi does besides mine.......

it will right interetsing to see how far it would go towards the 160 mark...ofcourse then ud take off the amount where using 16" or 17" alloys restrict the figure...