Names down... Who would genuinely attend a SW meet.

[CraigGreen]

, o yes it was, was that when i was on the M5 hardshoulder?

Yeah think it was actually. Nice car/shell. lmao

[chip]

What motor have you got mate, im in taunton too, shall keep an eye out

Ive got a vauxhall nova with some stickers on it mate. you cant miss it

[richie-calibre]

Ive got a vauxhall nova with some stickers on it mate. you cant miss it

Is it yellow or white?

[richie-calibre]

Yeah think it was actually. Nice car/shell. lmao

Picking it up this weekend after been painted again, NOW it's time to drive it

[marky2606]

me!!

[chip]

Is it yellow or white?

* cut and paste *







Spec:


Engine Bottom End:
C20XE block
Line Bored
Sump surface machined flat
Head mating surface machined perfectly parrellel to bearing tunnel
Bores exactly perpendicular to bearing tunnel
Block stress releived by hand to remove casting marks and other stress raisers
ARP mains
ARP headstuds
ARP2000 rod bolts
Opel Motorsport Steel XER crankshaft
Arrow Conrods
Arias Pistons
Oil Squirters



Cylinder Head:
Coscast casting
Neil Roper Developments port bored inlets
Neil Roper Developments port bored exhausts
Neil Roper Developments hand finished inlets
Neil Roper Developments hand finished exhausts
Piper double valve springs
Solid lifters
+1mm 214n stainless exhaust valves
+1mm 214n wasted stem stainless inlet valves
Cometic 1.9mm gasket



Gearbox:
Getrag F28
Quaiffe ATB diff
Twin plate paddle clutch
Lightweight flywheel



Inlet:
SBD/Jenvey throttle body manifold
Jenvey throttle body spacers, 50mm
Custom made inlet adapter plate
19mm ally trumpets
RS200 inlet plenum
Vectra V6 64mm throttle body
2.5" ally inlet piping
Blue silicon hoses and joiners



Turbo:
GT35R Garrett
Tial 38mm wastegate
Earls filter
Braided feed line with inline flow restrictor



Exhaust:
Doug Cook manifold to my reequirements
Doug Cook produced exhaust to my specs
Doug Cook wastegate pipework to my specs
Steel exhaust gasket

Cooling
2 * ZXR600 radiators for charge cooler water
1 * ZXR600 radiator for turbo cooler
VAG water pump for turbo cooler
Subaru water pump for charge cooler
Charge cooler made by doug cook from 2 4wd cossie intercoolers

[richie-calibre]

* cut and paste *







Spec:


Engine Bottom End:
C20XE block
Line Bored
Sump surface machined flat
Head mating surface machined perfectly parrellel to bearing tunnel
Bores exactly perpendicular to bearing tunnel
Block stress releived by hand to remove casting marks and other stress raisers
ARP mains
ARP headstuds
ARP2000 rod bolts
Opel Motorsport Steel XER crankshaft
Arrow Conrods
Arias Pistons
Oil Squirters



Cylinder Head:
Coscast casting
Neil Roper Developments port bored inlets
Neil Roper Developments port bored exhausts
Neil Roper Developments hand finished inlets
Neil Roper Developments hand finished exhausts
Piper double valve springs
Solid lifters
+1mm 214n stainless exhaust valves
+1mm 214n wasted stem stainless inlet valves
Cometic 1.9mm gasket



Gearbox:
Getrag F28
Quaiffe ATB diff
Twin plate paddle clutch
Lightweight flywheel



Inlet:
SBD/Jenvey throttle body manifold
Jenvey throttle body spacers, 50mm
Custom made inlet adapter plate
19mm ally trumpets
RS200 inlet plenum
Vectra V6 64mm throttle body
2.5" ally inlet piping
Blue silicon hoses and joiners



Turbo:
GT35R Garrett
Tial 38mm wastegate
Earls filter
Braided feed line with inline flow restrictor



Exhaust:
Doug Cook manifold to my reequirements
Doug Cook produced exhaust to my specs
Doug Cook wastegate pipework to my specs
Steel exhaust gasket

Cooling
2 * ZXR600 radiators for charge cooler water
1 * ZXR600 radiator for turbo cooler
VAG water pump for turbo cooler
Subaru water pump for charge cooler
Charge cooler made by doug cook from 2 4wd cossie intercoolers

Very nice indeed, you from over the nerrols farm area, think i have seen this before.

[CraigGreen]

Richie, is your Calibre on dark/anthracite wheels?

Think I may have passed you coming back from PVS as you exited the M4/joined the M5 at Thornbury.

I was in a black Fiesta, looking in appreciation....

[kazsymonds]

Are we any closer to a meet?

[chip]

Yes mate, we're 1 month closer exactly today

[patrikbrunt]

the blackbrook tavern in taunton is reaching completion now... maybe a lil meeting there could be arranged? is right next to the motorway and has a pretty big car park?

[chip]

Im quite happy with that location

[kazsymonds]

Im happy with that location.

[ddiorazio]

when is it all happening then?

[CraigGreen]

Sunday 3rd of August anyone?

[Benn]

Anychance of a post code of where it is?
So i can see how far it is..

[patrikbrunt]

The Blackbrook Tavern: Ilminster Road, Ruishton, Taunton, Somerset, TA3 5LU

[kNeo_gHau]

I'm doing a 4-midnight shift on the 3rd and would be very very lucky if i can get it off or swap shifts with someone

[Cesarokiddy]

3rd is cool wiv me, only down the road :-)

[Benn]

Hhmmm 105.66 miles, Estimated journey time: 2 h 34 min

[Cesarokiddy]

In real life if 1 3/4 hours, M3, Newbury bypass, A303.

[Dazz1772]

if my cars running right ill be at any i can attend

[chip]

Ford fair that day so I wont be around sadly myself, have a good one though lads

[snige87]

is there a final date on this?? i may be able to get a few to attend

[patrikbrunt]

is there a final date on this?? i may be able to get a few to attend

what colour is your gsi mate? cant remember seeing any round chard but ill keep a look out!