This post is just for information at the moment. I need to know what people would be prepared to pay for a Rolling Road session, ie a bhp and torque figure with graphs and perhaps some tweaking if possible.
Most places charge quite a bit per hour so what does everyone consider reasonable?
15-20
lmao
i spose around 30 notes is ok.
15-30 rubs would be cool
30's cool, providing they do it properly.
Originally Posted by Brian_S: Woooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo!
upto £30 as long as its done properly would be great fun
everythings gone a bit Euro....
a 4wd road would be nice!!
is that the same camp as the saton martin
only joshin mate
i've had too much j'd, thats sposed to be aston martin lmao
No more than £20.
If it was a big group of us then £20 seems like the maximum. Very interested though, and if it was more I would probably be Ok with it.
that means i'll have to get it chipped then
where abouts were you thinking of London?
"KNOWLEDGE IS POWER"
I hadn't decided on a place yet, some are alot more expensive than others as the expensive ones tend to be more acurate.
if me engines back together i'll be up for that......a bit more work yet though!!!!!
its not knackered, ok it is at the moment, but it'll be a beast when it's finished
"not fecking likley at this rate"
it'll be a while yet, especially if lee's doin it lmao
good. that'll give me time to get the beast back together then, ive got erne poliching the head at the mo seeing as did such a great job on hes fiesta head!!!
he owes me a favour or two!!!
i hear yours got a decent read out you must be chuffing chuffed!
decided to go for the reprofiled cams, despite a previous warning, never heard of problems with reprofiled cams before?
you?
its not knackered, ok it is at the moment, but it'll be a beast when it's finished
"not fecking likley at this rate"
Mw don't forget me!
Smile! Be happy and enjoy it.... :)
lets say not yet anyway'si spose its always possible to get a moody set, the more lobes on the cam, the more chance i guess.
lets just say i got a higher chance than you
scott, where did you get your's done after the last se rr session... as I'm tempted to get the manta done to see what effect the exhaust has.
Originally Posted by Brian_S: Woooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo!
Matt, we both went along to a place in Dorking, I think it was Motorvation Motorsport:
http://www.motorvation-motorsport.co.uk/contact.htm
they seemed pretty accurate.
Na, they were really bad Dave. Remember they held us up for 90 minutes because they were just faffing around?
I wouldn't ever recommend them and their method of measuring the revs was the same as at Gerald Dale.
I can give you the name of a really acurate place Animal (as acurate as you are going to get) but they will charge you £70/hour. Its used for mapping Skylines, Supras, Eov's, Cosworths and things like that. They have all the proper gear to measure everything.
The figures 'seemed' reasonable, but as you say, we had to wait ages and I wouldnt go back there.
I would go to a group one though, never done it, must be quite fun in a nice big group.
Region Invasion!!
Hello,
Just a quick note to those that my be interested!!
There's a RR session being held in Norwich on 06.04.03, £25 per run if payment made in advance!!
If anyone's interested then please contact me!!
Thanks
Neil
POLARIS RACING - You'll be GREEN with envy!
Click to view Polaris
You'd be welcome to come an visit my rolling road. We normally charge £24 for a power run but we can discuss a group booking on a flat rate which would work out cheaper.
Rollers are SUN Ram 12 not the ones show on the website. Only been in for a week or so.
www.rollingroadtune.co.uk
Simon
www.rollingroadtune.co.uk
www.rollingroadtune.co.uk
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote