The clutch is getting done on my 306 tomorrow. Suppose the cold + your old knees / hips wont really go together well lmaoOriginally Posted by neil105
For its MOT the bloody 306 needs - Discs x 2, Front bearings x 2, rear bearing x 1, passenger steering boot and a side light
Do you guys do kitchens at work Neil? Removing old fitted kitchens and putting in new ones?
old bones you've no idea mate tennis elbow too, and i don't even play the game lmao
take it the 306 is in the garage
this kitchen for yourselves
The clutch is getting done on my 306 tomorrow. Suppose the cold + your old knees / hips wont really go together well lmao
For its MOT the bloody 306 needs - Discs x 2, Front bearings x 2, rear bearing x 1, passenger steering boot and a side light
French cars
Jack said,
Surely you are only pulling it one way though? ie. you are pulling it along its length.
306 is on the drive at the moment but I'm taking it over to Newmill tomorrow and will get my hands dirty helping someone who knows what they are doing. Keeps the cost down too.
It's not a whole kitchen I'm after as ours is fine to be honest. Its just that under the cutlery drawer there are 2 other drawers. On one the back is missing and I can't bodge some thing on to it to stop the contents falling to the bottom and the one below it has no base, back or side to it. just the runners and the front part lmao Just seeing if you have to 'skip' old units / drawers and maybe I can scavenge bits from them lmao
Agreed! but I couldn't find a decent mk3 Astra TD for a daily hackFrench cars
Whats wrong with driving the arsetra everyday?
Jack said,
Surely you are only pulling it one way though? ie. you are pulling it along its length.
Nothing. I just don't want to lmao
melv the firms not done a kitchen since i've been there
just have to buy a base unit
Dont understand that, mine gets horsed everyday because its a comfy car! The uncomfy car is only for the weekends lmao
Jack said,
Surely you are only pulling it one way though? ie. you are pulling it along its length.
take it the fronts of the drawers can be swapped over can they?
TBH i'm toying with the idea of a redtop for the Astra, selling the whole thing and putting the engine into either a Nova Saloon, Corsa B or a Mk3 Astra 3 door and having a play thing sitting for the weekends. i want to keep the 1.8 so I can do the under 1800 class again lmao pointless probably but what the hell, be aswell doing it now before I'm married / have kids lmao
yep you buy base units with draws,no fronts just mind what size it is
Nova saloon might be fun but the corsa has been done to death! An old mk1 astra XE
Jack said,
Surely you are only pulling it one way though? ie. you are pulling it along its length.
i know where a mk1 astra is
but why not NOS the 1.8
Novas and MK1's are usually rusty as hell, corsa redtop has been done to death IMO but it does make sense. MK3 would be my preferred option but TBH I've not the mechanical know-how to change engines and **** so I will probably never do it. To hell with paying a garage to change them over, I'd rather spend the money on home improvementsNova saloon might be fun but the corsa has been done to death! An old mk1 astra XE
Cheers Neil.
NOS on an Ecotec? I sense blowing the fecker up lmao
Wheres the MK1 at? Is it a 3 door / tidy enough?
Anyone else drink G+T?? I've taken a real liking to it, Drank 2 bottles between Xmas eve and Hogmany and I'm on my 5th double tonight lmao
mk1s within a mile of me 3 door has a red top in it
its been of the road longer than my astra but its under cover
do you wave your little pinky about too lmao
Interesting!! Very interesting actually.
Would the guy / girl sell? Is it a rusty nail?
I'm gonna tell Murphy to bite you for that comment. lmao
only on a Sunday though!
would take a bit of prying to get it of the guy,i've had my eye on it for a while
its no rusty and had a re spray before it was lade up
did you get your wheels refurbished
getting halfords vouchers for my birthday (29th of Jan people!!) as I've 16" OZ's, 15" 205GTi alloys, my 17" Masitaly alloys, 2 x sets of 15" sport alloys, 15" sport steels and possibly a set of BMW wheels (before I sell them) to refurbish lmao.
What are the guys plans for the MK1?
the mk1s been sat in his shed 5 years hes prob waiting for a good price
i'm no interested in it as i'm happy with the mk2
Thats where i come in! you pay for parts ect and im not going to charge 40 quid an hour! and you can learn!
Jack said,
Surely you are only pulling it one way though? ie. you are pulling it along its length.
As in stupid amounts lmao
Just watched this courtesy of Vauxsport - http://uk.youtube.com/watch?v=RPzbBQ...eature=related
Mental to say the least!
If I tackled the XE into the MK3 and the corresponding swap into the track slag I'd end up with 2 fcubared engines and 2 powerless cars lmaoThats where i come in! you pay for parts ect and im not going to charge 40 quid an hour! and you can learn!
The clutch on the 306 and MOT work is prob going to be £10, £15 at most per hour at most and going by the last bill its not going to be made up for at least 3 months lmao
Meh, guy at work has one.
MK3 arsetra conversion to XE? Is that what you fancy?
Jack said,
Surely you are only pulling it one way though? ie. you are pulling it along its length.
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote