My Euro zaffy gsi....with pictures

[Benn]

Looks great in the snow.

[Ardenblueroy]

Looks great in the snow.

Drove ok to....no problems other than a huge collection of snow in the under tray.

[8valve-craig]

Your Nova is in the issue we've just finished, out to buy from the 15th of Feb.

Ooooh Thanks for that. Il set up a tent outside WH-smiths

[Ardenblueroy]

Ooooh Thanks for that. Il set up a tent outside WH-smiths

That's what I'm gonna do...and buy three copies.

[st207]

roy any pic of your bra on under side mate

[Ardenblueroy]

roy any pic of your bra on under side mate

I will get a pic taken and post it....it's quite untidy tbh...I had to modify it to make it look better.

[st207]

I will get a pic taken and post it....it's quite untidy tbh...I had to modify it to make it look better.

cheers roy your a star thats why yours looks a good kit mate.

cheers Ross

[v6_Al]

i want those calibre wheels for my cav. stunning! did they fit simply with wobblies or need antything else?

[8valve-craig]

Never realised they were calibre's. I have the chance of a set of 18's off a z3 for silly cheap, but wasnt sure if i could source a new barrell as one has a massive ding.

Could you friend at the wheel shop source one?

[Ardenblueroy]

i want those calibre wheels for my cav. stunning! did they fit simply with wobblies or need antything else?

At the time they didn't do Vaux fitment so I used a Mercedes 5x112 with wobble bolts.

[Ardenblueroy]

Never realised they were calibre's. I have the chance of a set of 18's off a z3 for silly cheap, but wasnt sure if i could source a new barrell as one has a massive ding.

Could you friend at the wheel shop source one?

when you say new barrel...are you thinking there splits?? As they are "fake" splits. I could get a new wheel...no probs.

[8valve-craig]

Ah right, yeah i thought they were 3 piece splits. What sort of price is one wheel? minus the centre cap. 18 x 8

Pm me if you preffer

[v6_Al]

At the time they didn't do Vaux fitment so I used a Mercedes 5x112 with wobble bolts.

you say 'at the time'... i thought they still didn't, or do they do vx now? I will prob buy 112's then but check the offset etc... cheers.

[Ardenblueroy]

Yeah they do a 5x110. Et35-45 so they will fit.

[Aamir]

That's one nice looking Zafira !
Engine Bay is Superb

[v6_Al]

Yeah they do a 5x110. Et35-45 so they will fit.

Thanks mate.

[Ardenblueroy]

That's one nice looking Zafira !
Engine Bay is Superb

Cheers dude.

[scottydot80]

sorry to be a pain in the jacksey but would you mind saying what she roled at and what perfomance mods you have. cheers dude. your bus is mint mate proper.

[Ardenblueroy]

sorry to be a pain in the jacksey but would you mind saying what she roled at and what perfomance mods you have. cheers dude. your bus is mint mate proper.

You don't want much...lol.

Engine spec is.

TX Autosport 3" Direct route intake.
TX Autosport 3" enlarged top hat.
TX Autosport cone filter.
TX Autosport fmic with enlarged pipework.
TX Autosport thermal inlet manifold gasket.
TX Autosport 255 high flow fuel pump.
Coll running thermostat.
Cosworth 071c Plugs.
Full custom 2.75" S/S Turbo back, single silencer exhaust system (standard main cat still in place).
Bailey DV26 dump valve.
Bespoke AmD Stage 1 Remap.

She rolled on the second run 248bhp and 340lbs/ft of torque...at 3500rpm so nice and low in the rev range...had the second most powerful torque figure of the day even beating a stage 1 VXR.
The bhp was down (was 253bhp) as the map was cutting back the ecu due to the new fmic and fuel pump....she's going in for a map update (stage 2) in a fortnights time, AmD have promised me 270bhp+ with 360lbs/ft of torque.

[Ardenblueroy]

Had my MOT yesterday, had to change my blue side lights for White "road legal" items and put a clip round a cv boot as it had vanished...costing me 20p. So new MOT with no advisories...bang tidy.

[scottydot80]

You don't want much...lol.

Engine spec is.

TX Autosport 3" Direct route intake.
TX Autosport 3" enlarged top hat.
TX Autosport cone filter.
TX Autosport fmic with enlarged pipework.
TX Autosport thermal inlet manifold gasket.
TX Autosport 255 high flow fuel pump.
Coll running thermostat.
Cosworth 071c Plugs.
Full custom 2.75" S/S Turbo back, single silencer exhaust system (standard main cat still in place).
Bailey DV26 dump valve.
Bespoke AmD Stage 1 Remap.

She rolled on the second run 248bhp and 340lbs/ft of torque...at 3500rpm so nice and low in the rev range...had the second most powerful torque figure of the day even beating a stage 1 VXR.
The bhp was down (was 253bhp) as the map was cutting back the ecu due to the new fmic and fuel pump....she's going in for a map update (stage 2) in a fortnights time, AmD have promised me 270bhp+ with 360lbs/ft of torque.

cheers for that bud, very nice bus you got there too very nice.

[Ardenblueroy]

No updates for a week....I've been in hospital since Monday with a poxy kidney infection.

Will be fitting a H7 6000k HID kit next week and will be looking into some more "bling" for the engine bay.

Looked in this months copy of TV and in the back it has "Euro'd Zafira".....can't wait to see it in the mag....be nice if it made the cover.

[M Beirne]

Just got home to find my Total Vauxhall on the door mat and this Zafira on the front cover, looking foward to reading about it.

[Benn]

Looks great in the mag dude.

[Ardenblueroy]

I don't have a subscription to the msg so have to wait for it to come out in the shops...have I got the main picture on the cover??