LinkBack URL
About LinkBacks
Thought i would start a new thread to document the build of my corsa turbo.
Currently a shell is been sourced, a weld in cage and seat rails ordered and the shell build will commence soon. Hopefully i will have it back and have inside painted within a month or so.
The cage kit that will be been fitted:
The cage will look like this all fitted:
]
I also have these bits:
284mm wilwoods:
Sparco corsa seat:
Sabelt seatbelts:
FMIC as advised by Muppetsport:
Solid engine mounts from chris astley:
Engine mount kit:
Large block flanges and hubs by harry hockly:
Rear turrets but not sure if i will use them yet:
Fuel swirlpot:
Poly carbonate windows from Airedale components:
One C20LET of the following spec:
CP pistons 8.2cr,
Farndon rods,
Z20LET oil pump,
GT3076 turbo,
44mm Tial external wastegate,
Nortech exhaust manifold,
Area six inlet manifold with a focus central throttle body,
Neil Roper port bored head,
Solid lifters,
Double valve springs,
+1mm valves,
ARP main studs,
Oil sprayers,
Engine build by SBS (steveboyslim),
Piper cams,
Autronic SM4 engine management,
Swindon racing hot rod cam belt cover,
SBS head studs,
HKS 1.3mm head gasket.
4 individual coils:
Got a F28 gearbox fitted with a quaife ATB diff all set ready to go, its also got a alloy flywheel and a 7 1/4" twin plate super clutch setup fitted to it:
Originally Posted by t45_ste 
