 | |
27-04-2008, 17:46
|
#1 | | MIGClub Member
Join Date: Aug 2005 Location: Manchester Drives: A Slow Corsa
Posts: 577
| Corsa Project No. 2 bought this little beast today, to replace my white one, as it's cleaner
cost me £340, not bad price really quite good condition, much much better than my white one
Plans are, coilovers, cesaro's, 2.0 16v..
will be transferring my smoked headlight's and opel badges over too probably
not sure then what to do |
| |
27-04-2008, 18:08
|
#2 | | MIGClub Member
Join Date: Nov 2000 Location: Huddersfield Drives: Corsa XE with TBs
Posts: 25,000
| Re: Corsa Project No. 2 Get the XE in, stop pissing about 
__________________ Wedding Photographer and Portrait Photographer in West Yorkshire - www.2007bc.co.uk |
| |
27-04-2008, 18:12
|
#3 | | MIGClub Member
Join Date: Aug 2005 Location: Manchester Drives: A Slow Corsa
Posts: 577
| Re: Corsa Project No. 2 all in good time...
should make more progress on this on, as i dont have to take my only car off the road lol
have to buy an extra mount too now, due to being a 12v, and my white one being 8v  |
| |
28-04-2008, 20:01
|
#4 | | MIGClub Member
Join Date: Aug 2005 Location: Manchester Drives: A Slow Corsa
Posts: 577
| Re: Corsa Project No. 2 When i got the corsa home, i couldn't fit it in my garage, so needed to do a bit of a tidy up..
just after starting, engine's moved and a few other bit's out..
Car partly in, filled boot up with junk from the back of the garage
fully in
engine back home lol
everything else back in - there's a car in there somewhere
there it is
next trip to the tip, with any crap i dont need, then it should be engine out,
and paint up the xe, some new gaskets, cam belt and water pump change then it should be going in |
| |
12-05-2008, 17:13
|
#5 | | MIGClub Member
Join Date: Aug 2005 Location: Manchester Drives: A Slow Corsa
Posts: 577
| Re: Corsa Project No. 2 not much of an update, but got an exhaust system for the xe now...
Grp A Scorpion cat-back, 3" tailpipe, with a 2.5" bore
pictured with my magnex 5x3 cat back
fitted it to the white corsa for now, so i can flog the magnex system
need's a clean, but meh |
| |
12-05-2008, 17:34
|
#6 | | Regional Co-ordinator
Join Date: Jul 2001 Location: Fareham,Hants Drives: A shineeeey Nova
Posts: 40,525
| Re: Corsa Project No. 2 Looks good, why the twin hangers?
__________________ Quote: |
My life so pitafull, the futures so bright.. Well i'd look a head but it burns my retinas
| |
| |
12-05-2008, 17:46
|
#7 | | MIGClub Member
Join Date: Aug 2005 Location: Manchester Drives: A Slow Corsa
Posts: 577
| Re: Corsa Project No. 2 Quote:
Originally Posted by Benn Looks good, why the twin hangers? | corsa's have too hanger's, unlike the nova's single on  |
| |
12-05-2008, 17:52
|
#8 | | Regional Co-ordinator
Join Date: Jul 2001 Location: Fareham,Hants Drives: A shineeeey Nova
Posts: 40,525
| Re: Corsa Project No. 2 Ah cool, corsa looks good. |
| |
12-05-2008, 18:00
|
#9 | | MIGClub Member
Join Date: Aug 2005 Location: Manchester Drives: A Slow Corsa
Posts: 577
| Re: Corsa Project No. 2 will look better with engine sat in the bay lol |
| |
12-05-2008, 18:18
|
#10 | | MIGWeb User
Join Date: Mar 2004 Location: whitby Drives: single turbo rx7
Posts: 3,330
| Re: Corsa Project No. 2 look at the size of that little 3cyl lol
nice little project mate,
__________________ i miss my vauxhalls breaking down |
| |
12-05-2008, 18:22
|
#11 | | MIGClub Member
Join Date: Aug 2005 Location: Manchester Drives: A Slow Corsa
Posts: 577
| Re: Corsa Project No. 2 Quote:
Originally Posted by astragsi look at the size of that little 3cyl lol
nice little project mate, | may be small, but it;s still faster than the current 1.2i corsa i drive daily   |
| |
12-05-2008, 20:20
|
#12 | | Regional Co-ordinator
Join Date: Jul 2001 Location: Fareham,Hants Drives: A shineeeey Nova
Posts: 40,525
| Re: Corsa Project No. 2 Quote:
Originally Posted by Ste L will look better with engine sat in the bay lol | True. get on with it. |
| |
12-05-2008, 20:52
|
#13 | | MIGClub Member
Join Date: Feb 2006 Location: Pontypool, S.Wales Drives: Astra Coupe Turbo
Posts: 2,646
| Re: Corsa Project No. 2 you cant replace a white corsa with a silver one just wont have the same effect, really like the white one minimal look. gotta laugh at how much space there is with a 3 cylinder lol, gonna be keeping an eye on this one
__________________ MIG Performance Vauxhalls WELSH Member |
| |
29-08-2008, 16:20
|
#14 | | MIGClub Member
Join Date: Aug 2005 Location: Manchester Drives: A Slow Corsa
Posts: 577
| Re: Corsa Project No. 2 Bit of an update, as i've not done one on here for awhile... 14th Jun 08
few new purchaces...
Pas rack - also got pump too
Carbon heatshield..
been painting stuff today too..
drive shafts
before
after
engine block
before
after 21st Jul 08
got a tigra scuttle panel for it.. 20th Aug 08
latest purchase, that arrived yesterday 29th Aug 08
Just received a manifold for the XE of Luke..
it's look's slighly oversized, with a zafira cat, with corsa fitment on the end  |
| |
29-08-2008, 17:51
|
#15 | | MIGClub Member
Join Date: Jun 2008 Location: Leicestershire Drives: Corsa 1.2 Twist
Posts: 231
| Re: Corsa Project No. 2 |
| |
31-08-2008, 17:35
|
#16 | | MIGClub Member
Join Date: Aug 2005 Location: Manchester Drives: A Slow Corsa
Posts: 577
| Re: Corsa Project No. 2 Picked up some new wheels today  |
| |
31-08-2008, 17:43
|
#17 | | MIGClub Member
Join Date: Jun 2008 Location: Leicestershire Drives: Corsa 1.2 Twist
Posts: 231
| Re: Corsa Project No. 2 look bright lol   |
| |
31-08-2008, 17:57
|
#18 | | MIGClub Member
Join Date: Aug 2005 Location: Huntingdon/Cambs Drives: Mk3 GSi-T/SportiVan
Posts: 1,142
| Re: Corsa Project No. 2 Astra SRi turbo wheels? |
| |
31-08-2008, 18:03
|
#19 | | Regional Co-ordinator
Join Date: Jul 2001 Location: Fareham,Hants Drives: A shineeeey Nova
Posts: 40,525
| Re: Corsa Project No. 2 Is the filler cap from the guy on cs? If so i hope its been than joey bs one the guy did, that was crap.
Whats the gen on the manifold? |
| |
31-08-2008, 18:05
|
#20 | | Admin
Join Date: Jun 2000 Location: Hampshire, UK Drives: Vectra Derv Wagon
Posts: 27,390
| Re: Corsa Project No. 2 Quote:
Originally Posted by J Sabo Astra SRi turbo wheels? | 4 stud Corsa C SRi wheels I think.
__________________ I now do not run Private Messaging on MIG.
Please email me at - tom@migweb.co.uk.
If you're query is regarding part of the website please use the helpdesk |
| |
31-08-2008, 18:08
|
#21 | | Gagged
Join Date: Dec 2007 Location: port talbot, s wales Drives: corsa xe gsi rep
Posts: 1,012
| Re: Corsa Project No. 2 Quote:
Originally Posted by Tom Williams 4 stud Corsa C SRi wheels I think. | this is what i thought  |
| |
31-08-2008, 18:19
|
#22 | | MIGClub Member
Join Date: Aug 2005 Location: Manchester Drives: A Slow Corsa
Posts: 577
| Re: Corsa Project No. 2 Quote:
Originally Posted by Benn Is the filler cap from the guy on cs? If so i hope its been than joey bs one the guy did, that was crap.
Whats the gen on the manifold? | it was bought off a guy of cs, not Dan who usually does them, and this aint the best really, gonna do a bit of work on it myself, and sort it a bit, when i can be bothered..
edit - just checked pm's - bought it off a lad called liamgallagher1994 on cs, not sure who be got it off
the manifold, not sure really, it's slightly bigger bore than my standard one, got a zaf cat on it, and bolts to a corsa system.. the latter being the main reason i bought it, as im lazy Quote:
Originally Posted by Tom Williams 4 stud Corsa C SRi wheels I think. | you would be correct  |
| |
31-08-2008, 18:27
|
#23 | | MIGWeb User
Join Date: Feb 2002 Location: West Yorks Drives: Corsa Sport 2.0 XE
Posts: 4,656
| Re: Corsa Project No. 2 orange wheels FTW!!  |
| |
31-08-2008, 19:24
|
#24 | | MIGClub Member
Join Date: Aug 2005 Location: Manchester Drives: A Slow Corsa
Posts: 577
| Re: Corsa Project No. 2 not sure if i'll keep them this colour though...
full pic  |
| |
31-08-2008, 19:31
|
#25 | | Regional Co-ordinator
Join Date: Jul 2001 Location: Fareham,Hants Drives: A shineeeey Nova
Posts: 40,525
| Re: Corsa Project No. 2 Quote:
Originally Posted by Ste L it was bought off a guy of cs, not Dan who usually does them, and this aint the best really, gonna do a bit of work on it myself, and sort it a bit, when i can be bothered..
edit - just checked pm's - bought it off a lad called liamgallagher1994 on cs, not sure who be got it off
the manifold, not sure really, it's slightly bigger bore than my standard one, got a zaf cat on it, and bolts to a corsa system.. the latter being the main reason i bought it, as im lazy  | Cool cool. |
| |  | | | | » Search | | To use the advanced search, please log in. | | » Forum Stats |
Members: 43,214
Threads: 310,613
Posts: 3,496,761
Top Poster: LEE69 (43,150) | | Welcome to our newest member, chrismessenger | | » Join MIGClub Today | Join online
now!
Members receive extra MIGWeb features plus all the benefits
of being a MIGClub Member.
It takes just two minutes to join via PayPal
and your account will be instantly upgraded. | |