Budget 1/4 mile car
+ Reply to Thread
Page 1 of 14 1 2 3 4 5 6 7 8 9 10 11 ... LastLast
Results 1 to 25 of 348

Thread: Budget 1/4 mile car

  1. #1
    MIGWeb User
    Join Date
    Oct 2003
    Location
    Nr St Ives, Cambs
    Posts
    5,312
    Drives
    Pug 309 Cosworth

    Wtf Budget 1/4 mile car (12.5 run so far)

    With one Nova finished (well sort of ) It wasn't going to be long till the need for another came around :laugh:

    So it began last week when Turbo Gav and I started to think of a seriously cheap way of going fast on the 1/4 using maybe some bits we had and sourcing everything else including a car but keeping costs to a minimum.

    Its Friday 21st September, I've just got in from work and Gav sends me a link to a Nova he has seen on Ebay, £130 tax and tested all original 1984 1.2 Nova ! what was even better was the 21k it had only covered !

    Sensibly we got straight in the chavalier and headed straight for Ipswich via a bank heading towards the owners after already agreeing that were going to buy it whatever shape its in lol

    We arrive to find a slightly rusty looking green nova, it was sold before we had even got out of the car, a quick deal was done with the old owners and we were off ! ( I might add that at this point we had been informed it had been round the clock once but this was no worry to us....... or was it ?! )

    After not really inspecting the car much and the fact that it was as good as out of fuel we thought we would stop for a refuel and a good look round it, well lol the water in the header tank looks a bit suspect and the hole in the battery tray was well hidden by the battery ! Gav then informs me its been running on 3 so we head off sharpish trying to sort of nurse it home. Another 10 miles on and it blows the top rad hose, as were on the move it makes sense to keep going so we continue on our merry way home although within 30 mins its coughed and spluttered and will only run if I push it down the road with the Cavalier lol

    After getting it home we sat around thinking what route to go down with it, enginewise it had to be a 2L XE, we thought about using a F15 smallblock gearbox but as good as that would of been for the track it would of been totally useless for the strip so we opted to stick to a big box for strength.

    Powerwise the only sensible modification would be Nitrous as we both had kits and obviously the only cost was refills so a plan to maybe use upto 200hp was decided upon

    Laying the best pasrt of 300+hp down isn't going to be easy though and a proper LSD isn't cheap and would cost our total budget limit so out with the welder and special edition drag racing welded diff was made on a budget of some welding wire.

    Its now saturday evening and we start to strip the nova of everything important, the more we remove the more holes we find ! the car is certainly original thats for sure ! rotten as a pair springs to mind !

    Here some of the first pics :



    Possibly the cause of the misfire ?



    More :






    The weight loss mods now start taking place, firstly the hole saw comes out for a few test runs :



    Then the Firewall as we needed a repair panel for the battery tray:





    After those first modifications I started to remove all of the sound deadening and dash whilst Gav tried to do something with what was left of slam panel.

    After a few hours we were left with this :





    Monday night we hit it hard again and tried to get as much done as possible as on sunday we had decided to give the car a lick of spray paint as it was going to look outrageous if we left it a rusty green colour.

    The engine bay was welded up the best you could get it, strengthening plates were made up for the crossmember and the old firewall was used to make a new battery tray and fill in the old heater matrix holes. Whilst I continued to sort the interior out and Gav finished off the bay a mate came over with his da and rubbed down the bodywork which saved a lot of time.

    Here is the last pics I took of the shell before we left it on tuesday night:












    The bay isn't 100% done yet as we ran out of mig wire but it is getting there, next on the list to do after that is sort the interior out as there is a few holes and the rear valance needs some attention ! After that we just need 2 wings and a door maybe 2 from the scrapyard and its ready for the prepwork to be finished and the spray cans to come out

    Also on tuesday we got a reply to a wanted advert we posted about a engine being required. Tonight we headed over to Norwich to go and pick up a Calibra 16v at a very sensible price which still keeps us well under budget

    The new powerplant : (although I suspect this wont last too long lol )





    So in less than a week we are right on our way to getting this car ready for some Santa Pod action, our deadline although it may seem close is October 13th which is a Saturday Night Special where both Gav and I have done quite well in our old cars so maybe it just brings good luck to us !

    So on that note I'm off to bed but expect to see very frequent updates and changes !
    Last edited by jonlem; 14-10-2007 at 17:00.
    Welding and fabrication, custom roll cages, cnc parts + lots more PM me

  2. Remove Advertisements
    MigWeb.co.uk
    Advertisements
     

  3. #2
    MIGWeb User
    Join Date
    Aug 2006
    Location
    huntingdon
    Posts
    4,757
    Drives
    E46M3/GSXR750/RWD SCOOB
    Lots more to add as we go! managed to get all the engine mounts we need for £36.99! poly bush whole car for £28
    not that Sabo knows it yet but he's going to do us some race engine mounts with some resin he uses!lol
    Cant belive how clean this engine is! I dont think it knows whats in store.
    This has been so much fun already calling in a few favours etc along the way i hope you all come to pod to see us run will be a very funny night.
    ALL donations welcome! need .6 weld wire pmsl Laughing Laughing
    I have a personal goal to beat Just novas & corsas again.
    Il try my best for early next year as i want to see jonboy race me against my blue nova turbo in this car! (which is also currently being re-built) Mr. Green
    **** i look a **** in the photos love it
    Night everyone xx
    Manifolds,flanges,collectors,bends and car transport PM your needs.

  4. #3
    MIGWeb User
    Join Date
    Feb 2002
    Location
    Cheadle (Near Stoke)
    Posts
    3,898
    Drives
    Bluefin Focus ST
    Fantastic work, look forward to seeing what time it gets. What time are you realistically aiming for?

  5. #4
    MIG Regions Admin / South Central Regional Coordinator Benn's Avatar
    Join Date
    Jul 2001
    Location
    Fareham,Hants
    Posts
    54,167
    Drives
    Shiney C20let Nova
    Very cool dude,
    Love that colour green,
    I'm louder than gods own revolver and twice as shiney.

  6. #5
    MIGWeb User
    Join Date
    Aug 2006
    Location
    huntingdon
    Posts
    4,757
    Drives
    E46M3/GSXR750/RWD SCOOB
    Quote Originally Posted by imcsherry View Post
    Fantastic work, look forward to seeing what time it gets. What time are you realistically aiming for?
    Anything in the 12's would be good for a £500 car and that is the main aim, just see what happens really!lmaolmaolmaolmaolmao
    Manifolds,flanges,collectors,bends and car transport PM your needs.

  7. #6
    MIGWeb User
    Join Date
    Feb 2003
    Location
    ruislip
    Posts
    18,338
    Drives
    nova 1.8 16v on tbs
    lol, looks like alot of fun! might have a few bits to donate to the project if you need some rear dampers, roll bar etc etc

  8. #7
    MIGClub Member CortraGTE's Avatar
    Join Date
    Jul 2005
    Location
    The South West
    Posts
    8,014
    Drives
    XE Nova
    Nice, good luck with it lads!

  9. #8
    bux
    bux is offline
    MIGWeb User
    Join Date
    Jul 2006
    Location
    Northants
    Posts
    1,388
    Drives
    12.1 sec Corsa..@120
    good work gav..............you spent nearly 10% of your budget with me today....pmsl!! keep the pics cummin mate
    12 second corsa....12.1 @ 120mph
    vauxsport.com
    Total Vauxhall Cover Car Jan 2009

  10. #9
    MIGWeb User
    Join Date
    Oct 2003
    Location
    Nr St Ives, Cambs
    Posts
    5,312
    Drives
    Pug 309 Cosworth
    Thanks everyone !

    Bux thanks for sorting the panels

    Lee, Roll bar wont be needed as were on a diet, however some rear dampers could be useful as we only have the 121k old 1.2 ones lol
    Welding and fabrication, custom roll cages, cnc parts + lots more PM me

  11. #10
    MIGWeb User
    Join Date
    Sep 2004
    Location
    Newport area S Wales
    Posts
    997
    Drives
    transit connect
    i love the 'special edition drag racing 'welded diff.
    vauxparts@googlemail.com

  12. #11
    MIGWeb User
    Join Date
    Oct 2003
    Location
    Nr St Ives, Cambs
    Posts
    5,312
    Drives
    Pug 309 Cosworth
    LOL, one part we keep on the shelf if required !
    Welding and fabrication, custom roll cages, cnc parts + lots more PM me

  13. #12
    MIGWeb User
    Join Date
    Feb 2003
    Location
    ruislip
    Posts
    18,338
    Drives
    nova 1.8 16v on tbs
    i'll have a kick about in the garage see what else i have that might be of use, got a slightly mangled fiberglass bonnet if you want it too, let you know what i find

  14. #13
    MIGWeb User
    Join Date
    Jul 2002
    Location
    Northern Ireland
    Posts
    2,571
    Drives
    6SPD 16V Turbo Nova
    Your all insane! Shall be keeping a close eye on this!

  15. #14
    MIGWeb User
    Join Date
    Oct 2003
    Location
    Nr St Ives, Cambs
    Posts
    5,312
    Drives
    Pug 309 Cosworth
    Quote Originally Posted by lee303 View Post
    i'll have a kick about in the garage see what else i have that might be of use, got a slightly mangled fiberglass bonnet if you want it too, let you know what i find
    We'll definately take the bonnet Lee !

    we were just sayign that we need a semi smashed one that we can "bond" back together.

    Obviously we would have to use super glue as filler is too heavy lmao

    Really appreciate your offer ! every little counts
    Welding and fabrication, custom roll cages, cnc parts + lots more PM me

  16. #15
    MIGWeb User
    Join Date
    Aug 2006
    Location
    huntingdon
    Posts
    4,757
    Drives
    E46M3/GSXR750/RWD SCOOB
    Thanks Lee have you got a slightly bumped bootlid pmsllmaolmao (Dont want much do i)
    Jonboy got a bucket seat and harness today
    Mounts turned up
    Mate picked up 2 minter doors and wings for £20 bargainlmao
    Bux ordered rear repair arches
    14" steelies and hubcaps (mint) found in loft!
    Found a gsi rear bumper in back of workshop that never sold!

    Anyone got a digi dash and sender they would like to donate? we aint even got a rev counter! pmsllmaolmao and we sure as hell aint buying one
    Manifolds,flanges,collectors,bends and car transport PM your needs.

  17. #16
    MIGWeb User
    Join Date
    Oct 2003
    Location
    Nr St Ives, Cambs
    Posts
    5,312
    Drives
    Pug 309 Cosworth
    Gsi bumper can go in the bin ! I like the old style bumpers
    Welding and fabrication, custom roll cages, cnc parts + lots more PM me

  18. #17
    MIGWeb User
    Join Date
    Aug 2006
    Location
    huntingdon
    Posts
    4,757
    Drives
    E46M3/GSXR750/RWD SCOOB
    lmaolmaolmaolmao
    Just to cheer you up the wings we got today are mk2 and i have spare mk2 headlights and grill lmaolmao
    Fresh faced rustbucket!
    Manifolds,flanges,collectors,bends and car transport PM your needs.

  19. #18
    MIGWeb User
    Join Date
    Oct 2003
    Location
    Nr St Ives, Cambs
    Posts
    5,312
    Drives
    Pug 309 Cosworth
    Your so good to me Chavin x lol

    You will need a facelift front bumper if you want to run the newer ligths and grill
    Welding and fabrication, custom roll cages, cnc parts + lots more PM me

  20. #19
    MIGWeb User
    Join Date
    Aug 2006
    Location
    huntingdon
    Posts
    4,757
    Drives
    E46M3/GSXR750/RWD SCOOB
    £2.50 and a box of maltesers and il leave it mk 1 DEAL?lmaolmao
    Manifolds,flanges,collectors,bends and car transport PM your needs.

  21. #20
    MIGWeb User
    Join Date
    Oct 2002
    Location
    South London/ Surrey
    Posts
    27,263
    Drives
    A4 sport avant Clio172
    I can donate a rear bumper, normal tailgate and a set of genuine low mileage clocks WITHOUT rev counter lmao
    www.shonkyopels.de

  22. #21
    MIGWeb User
    Join Date
    Oct 2003
    Location
    Nr St Ives, Cambs
    Posts
    5,312
    Drives
    Pug 309 Cosworth
    lmao lmao lmao lmao lmao lmao lmao lmao
    Welding and fabrication, custom roll cages, cnc parts + lots more PM me

  23. #22
    MIGWeb User
    Join Date
    Oct 2003
    Location
    Nr St Ives, Cambs
    Posts
    5,312
    Drives
    Pug 309 Cosworth
    Quote Originally Posted by turbo gav View Post
    £2.50 and a box of maltesers and il leave it mk 1 DEAL?lmaolmao
    Welding and fabrication, custom roll cages, cnc parts + lots more PM me

  24. #23
    MIGWeb User
    Join Date
    Jun 2003
    Location
    Thatcham, United Kingdom
    Posts
    6,473
    Drives
    Fear into children
    Mate of mine may have a digi dash and sender, will have a word with him tomorrow... or later today i guess!

    Great project, keeping my eye on it..

    Ginge
    www.virtualseason.net For all your sports streaming needs

  25. #24
    MIGWeb User
    Join Date
    Feb 2003
    Location
    ruislip
    Posts
    18,338
    Drives
    nova 1.8 16v on tbs
    Quote Originally Posted by jonlem View Post
    We'll definately take the bonnet Lee !

    we were just sayign that we need a semi smashed one that we can "bond" back together.

    Obviously we would have to use super glue as filler is too heavy lmao

    Really appreciate your offer ! every little counts
    lol, no problem, havent got a bootlid though lmao

  26. #25
    MIGClub Member CraigGreen's Avatar
    Join Date
    Jun 2003
    Location
    way-out-west
    Posts
    15,198
    Drives
    4 spd 1.2 Nova
    Yess! A leaf green Nova! Same as my 1st car. What a rank colour!

    Please leave it mk1, too many facelifted Novas. The original look is being forgotten!
    Last edited by CraigGreen; 28-09-2007 at 12:26.
    it's a C20XE not a fookin Redtop FFS

+ Reply to Thread
Page 1 of 14 1 2 3 4 5 6 7 8 9 10 11 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts