My Nova's Rebirth - Page 65

Grim Reaper · 09-11-2008, 17:38

im assuming the inlet pipe between the TB and airbox/induction...???

benn, it will be awesome if you do carbs instead....less wires/pipes/hoses and more noise

**Benn** · 09-11-2008, 19:19

Ex Guv,
I'm gonnna try and use the ecotec inlet pipe and reroute it.

Quote:

Originally Posted by Grim Reaper

im assuming the inlet pipe between the TB and airbox/induction...???

benn, it will be awesome if you do carbs instead....less wires/pipes/hoses and more noise

I would like to but its gonna be alot of messing with megajolt and stuff..

***Tom Williams*** · 09-11-2008, 19:20

Ex?

Who said I was going totally?

Jack · 09-11-2008, 19:21

Is yours dispack?

Convert it to diesel, none of this ECU/ignition rubbish.

***Astra Dan*** · 09-11-2008, 19:23

Can't sleep in my bed tonight, I've just **** in it.

**Benn** · 09-11-2008, 19:25

Quote:

Originally Posted by Tom Williams

Ex?

Who said I was going totally?

You have close enough a few times... Till you get under lourn's feet and she tells you to go back to it..lol

Quote:

Originally Posted by Jack

Is yours dispack?

Convert it to diesel, none of this ECU/ignition rubbish.

Yeah it is, hence all the hassel.. and hahahaha No.

Quote:

Originally Posted by Astra Dan

Can't sleep in my bed tonight, I've just **** in it.

Glove box.... Bad monkey.

The Simps · 09-11-2008, 22:52

Quote:

Originally Posted by Benn

I would like to but its gonna be alot of messing with megajolt and stuff..

We've been thru this - its not that difficult.

But then again, LETS are awesome and insane in a nova!

**Benn** · 09-11-2008, 23:15

Quote:

Originally Posted by The Simps

We've been thru this - its not that difficult.

But then again, LETS are awesome and insane in a nova!

It is and isnt..

Steve! · 10-11-2008, 19:11

side skirts?

**Benn** · 10-11-2008, 19:15

No painted yet, not to fussed am the mo as drilling my sill isnt the niceest thought.

Steve! · 10-11-2008, 19:41

very true... just gorilla snot it them on instead

**Benn** · 10-11-2008, 19:46

Would rather have something to fully hold them on. As the tops will be glued in place..

**Benn** · 11-12-2008, 22:01

Winter update.

Got the car in the garage to strip the front end ready to work on the engine bay..
So car in the garage,

Front ends now semi striped.

Got this deileverd today.

Not very happy as its ment to be chromed which is doesnt seam to be, just polished and needs a bit of a buff. But can do that.

More tomoz, gonna finish stripping the front ready to get the engine out on sat/sunday.

***GTE 16V*** · 11-12-2008, 22:48

Nice, But how are you going to fit your twin 40s to this? .................................

Grim Reaper · 11-12-2008, 22:49

Quote:

Originally Posted by GTE 16v

Nice, But how are you going to fit your twin 40s to this? .................................

strange, i heard that he is slotting an LET into there

**Benn** · 11-12-2008, 23:02

I'd love a let, but sadly have no where near the money ineed to buy one. Again to run the twins i'd need megajoint nd at the mo i cant afford that either.. Basicly i'm screw either way. So for the mo i'll move and reroutewhat iu can then change when i can afford more.

Grim Reaper · 11-12-2008, 23:04

money can be such a poop sometimes

edit - how come the engine is coming out?? rebuild?? replace?

**Benn** · 11-12-2008, 23:09

Do a few gaskets and clean it up, fit new bits.
Repaint engine bay, smooth and hide more stuff.

Gaz86 · 12-12-2008, 00:53

looks like the fannymould jimbo did, cant you just have it chromed, shouldnt be more than £50 seeing as all the hard work has already been done.

Aamir · 12-12-2008, 11:08

Don't worry about the inlet too much, very little of it is seen anyway once powercap, afm & induction hose are on

**CraigGreen** · 12-12-2008, 16:38

That inlet blatantly isnt chromed, though I'd be dubious of anyone saying it would be. It looks nice enough though.

Winter plans sound good dude. Keep us updated.

**Benn** · 12-12-2008, 19:41

Quote:

Originally Posted by Gaz86

looks like the fannymould jimbo did, cant you just have it chromed, shouldnt be more than £50 seeing as all the hard work has already been done.

Yeah i'll gonna go to a local place with a few bits and see what they can do it for.

Quote:

Originally Posted by Aamir

Don't worry about the inlet too much, very little of it is seen anyway once powercap, afm & induction hose are on

True but you can still see it.. Can see yours quite well so.

Quote:

Originally Posted by CraigGreen

That inlet blatantly isnt chromed, though I'd be dubious of anyone saying it would be. It looks nice enough though.

Winter plans sound good dude. Keep us updated.

Prob is in the sellers pic it looked it. Needs good clean up and buff thb.

Finely got my wiper motor, RR are so crap they had lost it, but asked a postie i know and he found it, took him 2hours tho. But have it so with the bonnet off i can have a play..

SteveM · 12-12-2008, 20:18

oooooo shiny

Jimbo · 12-12-2008, 20:24

Quote:

Originally Posted by Gaz86

looks like the fannymould jimbo did, cant you just have it chromed, shouldnt be more than £50 seeing as all the hard work has already been done.

I never said funk all was chromed!! I aint sold one of them for over a year now..

**Benn** · 12-12-2008, 20:26

Was nothing to do with jimbo.