InsaneSwede's Astra MKI - Page 4

dethstar · 14-05-2007, 12:55

Quote:

Originally Posted by DaveB

Sincerely crazy. I cannot understand how a relatively low powered engined can pull under 10s on the quarter mile!

sofar he have run an
7.83s
142km/h
1.76s 60ft

this was at 1/8 mile strip with no glue on track.
after this race he found many things to improve.
and he is aiming for low 7s on 1/8 mile.

Rs1 · 14-05-2007, 13:44

It cant,lol.
7's is the 1/8 mile reading.

**Nobbie** · 14-05-2007, 15:01

I love zatzy.com, they had a connection with a mental yellow volvo, and a mental saab. Keep up the good work when you can, you know it'll be worth it!.

DaveB · 15-05-2007, 07:49

my bad

InsaneSwede · 08-06-2007, 23:15

Hey fellas...
something has happened..

i sold my special T3/T4 hybrid.
same day i bought a new one including wastegate.
no pictures just yet as it´s heading my way, may get my hands on it about wednesday i think.

new setup is
Garrett GT35R (GT3582R)
And a Tial 44mm wastegate.

Rgds from Sweden.

GeorgeGt · 09-06-2007, 21:25

so your engine will be the bug and your new turbo a windshield ?

crazy

Rs1 · 09-06-2007, 21:31

35R, good choice

**Nobbie** · 12-06-2007, 08:51

Can't wait to see this thing move!

InsaneSwede · 15-06-2007, 21:16

here fellas...
promised pics of new babies..

This bench starts to contain a lot of 'money' *lol*

now.. what can i buy now to make this one of the most high tech LET engines there is?

InsaneSwede · 15-06-2007, 21:23

By the way guys.. here´s a piccie of friends Astra MKII.

Chris S · 16-06-2007, 01:34

Any Spec Of Your Mates Blue Astra??

InsaneSwede · 16-06-2007, 09:18

Hello Chris.

I belive i have wrote down a quick info about the spec earlier in the thread.

Rgds.

InsaneSwede · 16-06-2007, 09:20

Quote:

Originally Posted by Nobbie

Can't wait to see this thing move!

myself can´t wait to feel it move

InsaneSwede · 16-06-2007, 09:20

Quote:

Originally Posted by Rs1

35R, good choice

Yes i belive this will be 'one heck of a engine'

InsaneSwede · 16-06-2007, 09:23

Quote:

Originally Posted by GeorgeGt

so your engine will be the bug and your new turbo a windshield ?

crazy

Honestly the engine will just scream for more than this 'teenieweenie' turbo.
But i got hold of myself when it comes to drivability.
This is about the biggest turbo you get 'normal' drivability from.

otherwise the engine would easily produce somewhere around 800hp with a bigger laggier turbo.
Don´t want that.

InsaneSwede · 06-07-2007, 14:30

Aaaaannnnnd were picking up the ball where we left it.
Have been working a bit to prep enginebay for paintwork.

No pics just yet. but i´m on it.

And the blue Astra mkII above in the pics has been on the rollers today.
a direct swap on exhaustmanifold to a calculated 4-1 manifold with mergecollector gave quite a lot.
15.3hp for a direct swap aint bad.,, not bad at all. it´s mental

Now they´re tuning camshafts and fuelmixture as it was running a bit rich.
we might see ~270hp when the day is over if their luck doesn´t end up in pieces.

astragsi · 06-07-2007, 17:03

any vids of your astra????

Chriscavturbo · 06-07-2007, 17:15

look's real nice mate, seeing this really makes me want to get on with my mk1 van.

InsaneSwede · 26-07-2007, 18:44

hi guys.. no vids

had one but i can´t find the cd.

here are a couple of pics
this helps service a lot:

primed enginecompartment:

topcoat finally done:

Now the fun part begin, start mounting all the goodies

rgds
Patrick

**Benn** · 26-07-2007, 18:46

Quote:

Originally Posted by InsaneSwede

By the way guys.. here´s a piccie of friends Astra MKII.

i love the headlights...

mattc · 26-07-2007, 19:51

your car is amazing. Keep up the good work

InsaneSwede · 29-07-2007, 11:50

Thanks mattc.

yesterday and today i have measured the rear wheel alignment.
was a bit off.. but not very far.

left wheel
0.3 degree toe out
-3.5 degree camber

right wheel
0 degree toe out/in
-3.5 degree camber

now its:

left
0 degree toe out/in
-2 degree camber

right
0 degree toe out/in
-2 degree camber

sorted!

might adjust toe a little bit later on to get som toe in. but i´ll read the tires first.

Rgds
Patrick

InsaneSwede · 30-07-2007, 17:04

today i modified the throwout bearing with a small spacer and to get smaller diam to fit raceclutch.

pic:

Will go down in the garage to make 4 more small welds.
Wanted it to cool down a bit so i took a pic for you lads..

InsaneSwede · 01-08-2007, 18:13

Update.
today the shortblock with gearbox went in:

mounted coolers and topmounts:

Rs1 · 01-08-2007, 18:30

Patrick is that the x22 block your using?
Converting to toyota running gear is a very clever idea, top stuff mate.

Rob

P.S. If you think your gonna see 650hp ish why such big injectors???