Big update
Got both driveshafts now on and working. I ordered myself 10 cv boot clips so I could do the job properly.
I then sprayed my previously prep'd camcover. I've gone for hammerite smooth yellow to match my brakes!
My Camshaft also arrived, gonna try keep it in one expensive piece this time! I put the ball bearing in the end, and also the nice little cap they sent me!
Didn't have my feeler gauges so have just left it there. Need to check clearances again now!
Tried putting the small alternator on, this is a temp measure till the bottom pulley is on
As the shafts were fitted, I filled the gearbox up with Fuchs finest oil. Retails at around £15 a litre! It has a cool easy pour device too!
I then Rivited on the bulkhead fuel panel
And then mounted my fuel reg.
I then decided to fit my TBs. I was leaving them off for easy access underneath, but with them on I could do my loom.
Which led to me 'trying' this- I LOVE IT!
I then started with the loom. I used all the correct bits.
Injectors and coil loom
![]()
www.shonkyopels.de
Looking good dude, loving the yellow.
I'm louder than gods own revolver and twice as shiney.
good stuff, needs yellow hoses now though...
Originally Posted by Turbostevo
Lee303. **** off. Your boring me now.
SHoNkyOpELs.de
looking good mate! wont be long and it'll be ready to go
who is mapping it?
Built by Pete Burgess, Mapped by Dave Young
impressive!!!! without words
whichever returns have given east project
I have several questions that hacerte, I send to you a private
OPEL CORSA B WorldCUP GSI16v
-----Sorry for my bad English------
Just had a flick to the start of the thread on PNG and LOL a lot when I saw this :
I'll have to send that to Reg
no quer*a hablar mucho en Espa*ol más que nada por educación... en cuanto a los demas foreros... además as* practico algo de inglés.. que seguro que la cago mil veces..
OPEL CORSA B WorldCUP GSI16v
-----Sorry for my bad English------
does it run emerald ecu then?
as dave walker will not touch any other ecu apart from his own!
Built by Pete Burgess, Mapped by Dave Young
love the new rocker cover
I've fixed this for you. Benn
Little update, not many pics as was mainly finishing of the engine loom. Just a few more wires to go. Think i'm going to have the emerald control my fan through a relay
I decided to fit the inlet cam up, all Ok and lubed, used new washer and bolt
Flatout came up, so we fitted the sunstrip. Nothing massive, just enough to keep the low sun away
Random picture that gets bay and wheels in!
Got my cooling hoses through. Roose motorsport ones, but without the writing.
Back in... notice oil cooler
![]()
www.shonkyopels.de
You are the man!!!!! Top work mate
Turbo Power is here!!!! And my god i LOVE IT!!!!!!!!!!!!
Getting close now mate, looking awsome
looking like a car again it looks awesome
I've fixed this for you. Benn