nova gsi clocks, fuel gauge and oil [ressure switch
bought some nova gsi clocks and have fitted them in my nova spin however the oil pressure gauge and the fuel gauge isnt reading, i took the clocks back out and found that my old clocks had a single wire and pin switch going to the oil pressure gauge but on the gsi clocks have a two pin switch, does anyone know where i can find one?? if anyone has fitted same clocks etc and has any advice would be great!!
cheers,
The fuel gauge in the new clocks is likely suspect IMO.
You need a oil press sender from the GTE/GSi which has terminals for the low press light & output for the gauge. Your Spin loom just has the wire for the light.
it's a C20XE not a fookin Redtop FFS
[quote=CraigGreen;3858652] You need a oil press sender from the GTE/GSi which has terminals for the low press light & output for the gauge.quote]
cheers,
any ideas where i can get one from??
Off a gte/gsi engine......
would do if i had one or one was in the breakers ....
Put a wanted ad up on here and png.
will do cheers m8,Originally Posted by LongLiveTheNova
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote