I have a central locking kit out of another corsa, and im wanting to install it in mine which doesnt have it. Basically i have the whole wiring loom attached to it, so i would be prob best to just seperate the bits i need?
i have the two motors, which both have 5 wires going into each.
Motor 1-
1-Blank
2-Black/red
3-Brown/White
4-red/brown
5-brown
6-black/yellow
motor 2-
1-black/blue
2-black/red
3-brown/white
4-blank
5-brown
6-black/yellow
i then have a module thing, has 11 wires going into it
1 black/yellow wire
2 brown/red wires going into same connection
1 black wire
1 black/red wire
1 red wire
2 brown/white wires (same connection
2 red/yellow wires (same connection)
1 brown wires
i need a little help as in what wires to connect to what and where to connect power supply, etc.
Thanks
i have the two motors, which both have 5 wires going into each.
Motor 1-
1-Blank
2-Black/red
3-Brown/White
4-red/brown
5-brown
6-black/yellow
motor 2-
1-black/blue
2-black/red
3-brown/white
4-blank
5-brown
6-black/yellow
i then have a module thing, has 11 wires going into it
1 black/yellow wire
2 brown/red wires going into same connection
1 black wire
1 black/red wire
1 red wire
2 brown/white wires (same connection
2 red/yellow wires (same connection)
1 brown wires
i need a little help as in what wires to connect to what and where to connect power supply, etc.
Thanks