group buy. Breville kettle

[Lugy]

Note the led stay warm system button for added boost control

Does it sharpen up the throttle response and stiffen the handle when you press it?

[Dexy]

Yeah it goes in to race i mean "boil mode" when you press it, you have to watch as there could be danger to teh manifold if you give it too much !!!!111111one

[kNeo_gHau]

Does it sharpen up the throttle response and stiffen the handle when you press it?

If you know what i mean

[Lugy]

If you know what i mean

[Dexy]

Yes you will definitely need servicing as the Engine Management Light is On. Can you not flash the codes?

I pulled out the diagnostics tool and checked the codes, its come up as 11 - Kettle sp pulse.

kettle running at
idle speed
Move kettle
slowly to and fro
approx. 1 m/1 yd or

test drive

so its ok wont be too bad a fix.

[MSG]

I pulled out the diagnostics tool and checked the codes, its come up as 11 - Kettle sp pulse.

kettle running at
idle speed
Move kettle
slowly to and fro
approx. 1 m/1 yd or

test drive

so its ok wont be too bad a fix.

Don't forget to disconnect the power lead overnight and this will reset the EM light after you fixed the problem.

[Dexy]

Don't forget to disconnect the power lead overnight and this will reset the EM light after you fixed the problem.

Cheers for the tips mate, If the worst comes to the worst ill just remove the bulb and that should sort it.

[Dom]

I can make you a device that will bypass the bulb - it will flash it for 5 seconds when you turn on the ignition then turn it off.

Only £99 delivered

[Dexy]

Thats pretty cheap, i think we should incorporate this in the group buy, say £136 for the bypass device, everyones a winner.

[djivesp]

this is how it COULD look.

[Dexy]

Thats the money shot.

[Aberdeenloon]

HMMM could this all lead to a mag for kettle mods Can see the name all ready " Kettle Power " Or Max Boil " lol

[spanishfly]

OMFG!!!!! There all sold out in Robert Dyas, proper mad think i'll kick my african dog

[MSG]

As I might have told you that I was getting some problems with mine because the thing would not start again soon after it had reached the operating tempertaure, I found the fault, it was a dodgy thermostate, so I took it out and gave it a good clean over and I bend a copper strip that loked like some sort of contact thingy, refitted and now It is constantly overheating and boiling dry? any ideas what might have gone wrong? have I done something may be or forgotton something? any tips would be appreciated. Thanks in advance.

[Candyman]

your going to love this!

http://pimpmykettle.ning.com/photo/p...%3APhoto%3A567

[spanishfly]

My kettle is reaching 101C is this ok? I can't find a cooling switch? Also do I need antifreeze?

[EY]

You could try a cool running thermostat. Then the water should never reach 100 degrees.

[tommychimp]

My kettle is reaching 101C is this ok? I can't find a cooling switch? Also do I need antifreeze?

No antehfreez man!

Dangerz to human belleh!

[Dexy]

You could try a cool running thermostat. Then the water should never reach 100 degrees.

yeah thats what i would say, does your fan not kick in at all mate?

[Jasovanooo]

pah tefal quickcup delivers the goods in 3 seconds

[Dexy]

pah tefal quickcup delivers the goods in 3 seconds

pics or stfu

[Jasovanooo]

http://www.dixons.co.uk/product.php?...amp_id=froogle

[rudd86]

what about a tapered 63mm trumpet spout?

[Gordon Livsey]

No antehfreez man!

Dangerz to human belleh!

lmaolmaolmaolmao

[Dexy]

I have some plans drawn up, what do you think??