Vauxhall Owners Forum banner

Wiring on 20xe engine loom

603 views 11 replies 6 participants last post by  DarrenH 
#1 ·
Hi due to problems with performance maybe someone could tell me when wiring the engine in, in the injection part (plastic length all encased above injectors) there is a spur with two sets of wires coming off it, one of which i know is the ICV, but the other i didnt know where it went, so i dont think ive plugged it in !!! :( I think they were red and white plugs, both two pin, the white one i think is plugged into the ICV, so does anyone know what the other does / plugs into???

James
 
#5 ·
no
its at the back of the engine located under your cold start valve
if you lay under the car and look up towards the back of the block you will see it easy

if i remember rightley the red clip goes to the sensor on the back of the engine the other to your cold start valve

have fun
brian
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top