Vauxhall Owners Forum banner

Uprated injectors - Anyone interested ??

770 views 9 replies 5 participants last post by  RDS 
#1 ·
I will be buying some uprated injectors from Bosch in around 2-3 weeks for my car. Yunis is planning to do the same which got me thinking of a possible group buy.

The injectors we are going for are Bosch 450's These have the same flowrate as the Bosch 803's (Greens) i.e. 381cc/min but, unlike the greens, are the correct impedance for use with the Motronic 2.7 ECU so will fit right in easy.


While on the phone I asked him about a possible group purchase and he said they may be able to take a little off it if enough were bought.

For a single injector they are £75 each but it may be less with the group buy. It takes around 2-3 working days to get them as they need to be bought in from Germany because they are not a "common" part in the UK so no-one stores them


This will have NO personal gain for myself apart from the possiblilty of a lower price for everyone. If you're interested then reply here and I'll see what I can do.

Rich
 
See less See more
#9 ·
RDS said:
Richie do they fit straight in? Also i will need to go back 2 a 3 bar fuel regulator! Would i need the phase 111 to be remapped??
Yeah, they fit straight in.

Remapping - not sure as you are talking about dropping the pressure again. Going by the post on upping fuel pressure, the standard injectors on 4.5 bar give 380cc/min.

Going for 450's at 3 bar will give 381cc/min so there's nowt in it BUT I would ask Ash at EDS and see what he says Rob as I dont know.


Rob (Savage) - It'll be 2 weeks anyways so see what happens. I will be posting on here whats happening.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top