I'm in the latter stages of fitting a c20xe into my 8v calibra but have come across a small problem. The three fuel pump connectors that go into the drivers footwell (2 black 1 green) have got....
green: 5 wires xe loom (4 wires c20ne loom)
black: 5 wires xe loom, (3 wires c20ne loom)
i have matched the colours and the pump is fuelling the injector rail but i want to check whats the best thing to do about this.
the car is turning over but not ready to start yet
any advice very welcome as always
green: 5 wires xe loom (4 wires c20ne loom)
black: 5 wires xe loom, (3 wires c20ne loom)
i have matched the colours and the pump is fuelling the injector rail but i want to check whats the best thing to do about this.
the car is turning over but not ready to start yet
any advice very welcome as always