Big C20LET thread 3x engines, spares + tuning goodies

[Nemesis]

***Engines***

Complete Coscast C20LET, believed to be standard except Cosworth Weber adjustable fuel pressure regulator and K&N filter. Comes complete and assembled with everything needed to run including ECU (non immobilised), loom, manifolds, downpipe, turbo, pipework, intercooler, clutch, flywheel, sump and pumps. Can be heard running and driven if you're quick

£1300

C20LET tall engine. This is the block and head, timed up, with all internals ie pistons, rods, crank, valvetrain, cambelt system, pumps, sump. Came from a Corsa C20LET that drove flawlessly. Very quiet, smooth and powerful.

£600

C20LET bottom end. Very good runner. Includes block, pistons, crank, rods (believed to have ARP bolts), sump, new water pump. Very smooth and quiet runner.
sold to primeraboy


*** Tuning bits ***

Corsa/Tigra C20XE/C20LET hoses as pictured. Coolant, ancillary and breather

£60

C20LET turbo with uprated actuator, tested. Holds boost very well. Zero smoke.

£300

C20LET turbo with uprated actuator, tested. Holds boost very well. Zero smoke.

£300

Chromed dizzy complete, really good condition, stunning

£40
Braided fuel line and in-line alloy filter for C20XE/C20LET rails. Cost nearly £100

£30

Genuine Bosch external fuel pump, ideal upgrade for safety and power. Will fit any Vauxhall with the correct fittings (under £5 from Pirtek) £45


Unknown external fuel pump, ran phase 2 safely, ideal upgrade, £35

Again will fit any Vauxhall


1x unknown cone filter, 80mm to suit C20LET afm £10 (top right)


Intercooler and pipe kit




Intercooler is 70x24x7cm with 2.5" outlets

Comes with some pipework, enough to go onto the bottom of a standard K16 turbo (and maybe Z20LET turbo). And a long section to run up towards the inlet. Not sure if the complete setup is there or not, you may need one or two pieces for your particular car

Hence only asking £60 for the lot. Intercooler alone is worth that!

Metal oil cap

£10

*** Spares ***

C20LET turbo spares - downpipe gasket, elbow bolts and springs, genuine Vaux, cost £30!!!

£15 free postage




3x standard tophats £10 each
Set of C20LET yellow injectors £35
"turbo" inlet cover £25
3x oil coolers £15 each with pipework
AFM to turbo pipe £5
Hot start valves £5
Coils £15
Rubber fuel lines with unions, £10 pair
Accumulator bulbs with solenoids and switches £20
Throttle body with TPS £15
Mutli-vee bottom pulley £5
1-way valve with pipework £8
AFM £50
Set of 16 stem seals, sealed in packet £10
ECU £125
Complete dizzy with hall sensor and cap £25

All prices exclude P&P
I accept cash on collection, postal order, paypal (buyer covers fees) or bank transfer
I'll do cheaper postage on multiple purchases
I won't post bonnets, bumpers or bodyshells so don't ask
No offers
First come first served

[Nemesis]

Couple more bits just added

[vectra640]

C20LET turbo spares - downpipe gasket, elbow bolts and springs, genuine Vaux, cost £30!!!

ill have them too mate as mines knackered

[Cavalier-C20LET]

bugger lol

[vectra640]

did you want them too

[Cavalier-C20LET]

yeah lol ach thats the way tho , i checked the thread before then ben must have added more by the time i checked you had replied, not to worry mate

[Nemesis]

Vultures...

[Cavalier-C20LET]

says the one.....eh eh

[vectra640]

[Dave Hay]

id like tophat, metal oil cap, ignition coil and bracket, let filter and a hot start valve if you could do a deal posted to aberdeenshire?

[Nemesis]

id like tophat, metal oil cap, ignition coil and bracket, let filter and a hot start valve if you could do a deal posted to aberdeenshire?

Not selling to you sorry.

[Dave Hay]

lmao

chav prick

[Nemesis]

lmao

chav prick

Why bother even replying? You know I won't deal with you in the past or present.

And I'm sure everyone on this site who knows me will laugh at the thought of me being called a chav

[Dave Hay]

yeah good for you and your website buddies

hope the tax man knows about these cars being bought to break for spares.......

[Melv]

****ing hell. Draw a line, the both of you.

[Nemesis]

yeah good for you and your website buddies

hope the tax man knows about these cars being bought to break for spares.......

Yep we'll be sure to have a good laugh at your expense. You bitter, pathetic, joke of a man!

And yes he does, feel free to make your own enquiries.

[Benn]

Any equal length shafts in?

[Nemesis]

Any equal length shafts in?

No sorry mate

[4u2nvgsi]

is there a oil pressure switch hidden in that alladins cave of yours. single wire.

[Nemesis]

is there a oil pressure switch hidden in that alladins cave of yours. single wire.

Sorry no mate

[Nemesis]

bttt

[LeeMutz]

Hi mate, interested in the Unknown Pump, The pump I have on my mk2 is the standard In Line Injection pump off a sri130, its a pump + a regulator thingy lol Does this pump replace both parts of my existing pump or just the pump part? (running XE by the way) - Don't suppose you have a dipstick and a coil lead going too do ya? Thanks a lot, Lee

[Nemesis]

That one sold last week Lee.... but still got the Bosch one left! That will fit your Mk2 fine, you've got a regulator on your fuel rail in the engine so thats no bother

Yep got a dipstick / breather pipe and coil lead

£50 collected for the lot or £55 posted

[LeeMutz]

don't need breather pipe, got that, just missing a dipstick for some reason lol Also need a complete mk3 handbrake cable if you have one? (done a disc conversion on the rear )

[Nemesis]

Yeah okay dipstick isn't a problem

Dont have any mk3 bits