C20let / C20xe Coscast Head. £125

[8valve-craig]

Best described as repairs only due to a small amount of work being required

There is 1 cracked valve guide (still intact just with a 10mm crack). 1 exhaust stud broken off. all three of the rear upper belt cover bolts broken off. and some very light scoring to 2 of the cam runners. which the worst of rubs off with wet & dry.

The face has a little left, looks to have been skimmed a few times but definately life left in it.

Both cams / pulleys (c20let) and all cam caps included,,, as are all the lifters (in numbered bags) along with the 8 good valves, springs caps and collets.

a previous owner has tried enlarging the area behind the valve seats. Its not a great job and buyer may want to tidy it up a bit.

I took the head to janspeed to ask their opinion on weather its worth mending or not and they say definately yes. They would have charged me £75 - £100 labour to tap out the threads, remove and re-fit one guide and lap the valves back in

The water stub is fine as are all the inlet studs.







£125 collected £140 delivered (mainland)

Craig 07557118213