Cammed 20xe and dispac c20xe woth coscast head

dumpycorsa · 04-10-2008, 19:26

Hi.I'm selling 2 engines which are currently complete but may remove the heads if I get a good offer.

The first engine is a cammed 20xe (GM HEAD)with complete wiring loom,ECU,eco tec pipe,cut down exhaust manifold to fit a nova without lowering the anti roll bar. Also has the inlet with cream injectors alternator etc. Just removing the starter and thermostat housing and leads from this for my new engine. The engine smokes and leaks oil from the oil pump gasket. The cams are Autosprint fast road/trackday cams 260deg duration.They've been in the engine for 1500 - 2000 miles. Engine does still pull well but like I've stated smokes under acceleration. Believed to be rings but not certain on that.Doesn't lose water and starts/runs fine.£225 all in or may split for less

Second engine was removed from a 1994 Opel calibra with 100,000 miles on the clock. The F20 box is with this engine if thats is needed but the threads for the front mount need tapping and helicoiling. This is a genuine Cos cast dispac head with the location lugs on the head. Is missing the cam and crank sensors. Also the injectors and cambelt/plug covers are missing. Comes with complete loom and ECU.£275 all in

Delivery can be arranged for these engines at a cost depending on the mileage.

I also have an xe inlet complete with fuel rail and cream injectors £25 and a 20xe exhaust manifold (without lambda sensor hole) with a corsa mating flange welded on the end £25. Collected on these items unless your having an engine then will put it all in the van for you.

Cheers Dave

**Bean** · 05-10-2008, 09:48

Hi if you split the first one how much for the cammed head with cams + dizzy?

pommyben · 05-10-2008, 09:53

How much for the cams posted??

dumpycorsa · 05-10-2008, 13:18

Quote:

Originally Posted by Bean

Hi if you split the first one how much for the cammed head with cams + dizzy?

It would be £175 with cams and dizzy. Cams on their own were £165 exchange. Can deliver if needed

dumpycorsa · 05-10-2008, 13:20

Quote:

Originally Posted by pommyben

How much for the cams posted??

I'll try to sell the cams with as much as poss for the moment ie with the head or ideally the whole block and exhaust and inlet manifold

dumpycorsa · 06-10-2008, 16:14

Both engines on pallets ready to go

dumpycorsa · 08-10-2008, 07:05

I'll split both engines.Coscast dispac head is hard to find. Also have ecotec pipe complete with AFM,inlet adaptor plate, and induction kit. Loud induction roar. £35

dumpycorsa · 11-10-2008, 03:08

Bizzle... · 13-10-2008, 08:04

How much for the AFM, pipe and induction kit on its own? Dont need the adaptor or ecotec bit, got a powercap. cheers

dumpycorsa · 14-10-2008, 17:48

any offers for the dispac coscast head?

Jam666 · 14-10-2008, 18:33

wat cams are in the first one?

dumpycorsa · 15-10-2008, 18:57

Quote:

Originally Posted by Jam666

wat cams are in the first one?

They're Auto sprint fast road/trackday cams. 260deg duration. Fairly mild cam but can just be fitted without any further mechanical modifications (no need for verniers, lifter up grades pocketted pistons etc). I would suggest an ECU map to gain the most from these cams. Speak to Autosprint for further details www.Autosprint.co.uk cheers Dave

5tox · 16-10-2008, 16:52

hi mate, if someone wants the cams out of either head id be willing to take the rest of it.
basically im just after a cheap bare cylinder head for a rebuild. dont need cams valves anything else really, just the bare head

cheers steve

dumpycorsa · 16-10-2008, 17:09

Quote:

Originally Posted by 5tox

hi mate, if someone wants the cams out of either head id be willing to take the rest of it.
basically im just after a cheap bare cylinder head for a rebuild. dont need cams valves anything else really, just the bare head

cheers steve

I've got a bare gm head that was removed due to mixing the oil in the water. I'd say it was pourous but I've not looked into it. Theres a thread on here about sleeving the oil gallery which looks easy to do. Your welcome to take this off of my hands and have a go if you like? I still have all components with this head if theres anything you do want with it eg cam caps or valve springs?

5tox · 16-10-2008, 17:31

hi mate, ill look into the sleeving thing a bit more and take it into consideration.

you live a bit far away so how much would you ask for it posted, im looking for one cheap as poss really

cheers steve

dumpycorsa · 16-10-2008, 17:37

Quote:

Originally Posted by 5tox

hi mate, ill look into the sleeving thing a bit more and take it into consideration.

you live a bit far away so how much would you ask for it posted, im looking for one cheap as poss really

cheers steve

£40 posted bearing in mind postage will be expensive. Thats a head with just valve guides and a few studs (inlet and exhaust) core plugs still fitted to

dumpycorsa · 17-10-2008, 16:42

Ok, due to people wanting the cos cast head and the cams I've come up with some prices combined -

The first engine has the cams but uses a GM head (no loss of water I guarentee). The head and cams from this engine I'm asking £175

Coscast dispac head with standard cams £230

Coscast dispac engine (head and block only) £250

Coscast head with the Autosprint cams fitted £350.

Hope this helps with peoples request. I did realise that the best parts of the two offers were on seperate engines and obviously if I just sell the 2 best bits then I'm left with odds and sods that nobody really wants. Hence why I'm asking £350 for the coscast and cams as I'm aware the rest probably wont fetch very much.

dumpycorsa · 19-10-2008, 23:25