C20LET lightweight flywheel

[vxlgsi]

replied

[xiaogary]

I am interested in a billet steel lightweight flywheel for C16XE or X16XE pot type flywheel for 8.5 inch clutch. 6 holes for the crank. Do you have them?

Whats the price of one? And the shipping charges to singapore?

Pls email me at xiaogary@singnet.com.sg

I may be interested to order more for my club members if this is good.

[vxlgsi]

I am interested in a billet steel lightweight flywheel for C16XE or X16XE pot type flywheel for 8.5 inch clutch. 6 holes for the crank. Do you have them?

Whats the price of one? And the shipping charges to singapore?

Pls email me at xiaogary@singnet.com.sg

I may be interested to order more for my club members if this is good.

Hi, i have pm'd you.. i do have flywheels to suit this engine, but in the uk they use a 200mm clutch not a 215mm clutch and the gearbox is 14 spline not 24 like yours. so we need to sort out afew things.

But im able to make a flywheel to suit any car and any clutch so im sure we can sort something out for you.

[vxlgsi]

up

[TigraTurbo]

So if i use an XE one what presure plate and disc should i use withe F28,also wich 2 lower puleys should i use so it doesnt touch the body?are you gonna send them over here?

[vxlgsi]

Yes you could use an xe flywheel with an xe coverplate and a let friction plate.

not sure which 2 pulleys you mean, i have the crank pulleys? wether they touch the body or not is down to you and where or how your engine sits etc.

no problem to post to greece just have to add the extra postage cost.

[TigraTurbo]

yes crank pulleys,the V belt is the narrowest? correct? do i have to check something else before i order them?

[vxlgsi]

yes v belt is the narrowest.

[TigraTurbo]

so what i need to check,i am a LET virgin lol,that double v belt, its going on a tigra,whatpulleys am gonna need?

[vxlgsi]

if your running power steering you need a double V pulley, if your only running an alternator you need a single V pulley.

[TigraTurbo]

Gonna run a pas,so the doubleV one and what should i use for the under drive?

[vxlgsi]

PM sent to tigra turbo

[dazerc]

Are these flywheels balanced and marked as to where to align the clutch plate up to match balance?
Do you do these for the Z20LET for the mk4 Astra GSI turbo?
Thanks

[vxlgsi]

they are dimanically balanced, as will your clutch be so no need to worry about lining any thing up. yes i have them for the zlet aswell

[xiaogary]

Hi, i have pm'd you.. i do have flywheels to suit this engine, but in the uk they use a 200mm clutch not a 215mm clutch and the gearbox is 14 spline not 24 like yours. so we need to sort out afew things.

But im able to make a flywheel to suit any car and any clutch so im sure we can sort something out for you.

I need to know the hole to hole dimension of the clutch cover's 6 bolts's hole to confirm fitting. Thanks.

I have pm u regarding payment using paypal. Please understand that bank to bank telegraphic transfer is very expensive in singapore which will cost me at $30 pound for the transfer considering the admin charges for both UK side and singapore side bank. If possible, I would like to settle the deal fast. Within tese few days to start my project. Thanks.

[vxlgsi]

up

[fishsoup2003]

Is your pot type lightweight flywheel for the Z20LET identical to the one for the C20NE? Just confirming does your Z20LET pot type flywheel have 6 screw holes and suit a 228mm diameter clutch plate?

Can you post to Australia? If so can you give a total price please for cheapest air freight and also sea freight?

[vxlgsi]

Do you want a flywheel for a z20let? or a c20ne? they use the same size clutch fitted as standard.

[sultanhq]

you've got mail. vxlgsi

[fishsoup2003]

Hi vxlgsi, Thanks for the quick reply. I'm after one for the Z20LET. My crankshaft flange has six screw holes, just in case there's more than one variant can you confirm the flywheel you sell also has six screw holes.

[vxlgsi]

yes all z lets have 6 crank bolts, supplied afew to oz already. Have them in stock, £195 delivered within uk

[fishsoup2003]

Hi vxglsi,
I just sent you an order for a Z20LET flywheel by email.
Thanks, Andrew.

[oily75]

want one for my c25xe i want to fit but its goin on a f20 or f28 so sure i need a flat xe / let one wont i lol

[vxlgsi]

yes i think you can use xe one. i have some lightweight ones in stock.

£170 delivered within the uk

[vxlgsi]

up