Fault code reader / clearer (Clears airbag lights also)

[BigMac]

Taking orders for the first 10 of these units
I’ve used the previous version for the last 8 months
Works with most modern vehicles (all Vauxhalls/ Opel/GM after 1996)
Views all fault codes
Clears any fault codes found (you would have to fix the problem first or they will come back)
Checks lambda probes
Air flow
Cat’s ect ect



CAN E-OBD Code Reader OBD-A4

This is the new generation of automotive code readers that support controller area network (CAN) protocol has arrived. The new model supports all OBD2 protocols, including the newly released controller area network (CAN) protocol, allowing users to keep up with the latest development in automotive diagnostic scanning.
Features:
1 Reads generic codes (P0, P2, P3, U0) and manufacturer specific codes (P1, P3, and U1)
2 Erases trouble codes and resets check engine lights
3 Displays I / M readiness status and state OBD check
4 Detects OBD2 freeze frame information
5 Determines the malfunction indicator lamp (MIL) status
6 Identifies and displays pending codes
7 Retrieves VIN (Vehicle Identification No. ) on 2002 and newer vehicles that support mode 9
8 Wider vehicle coverage with CAN protocol support
9 Displays total# of codes retrieved
10 Code definitions displayed on unit screen
11 Memory / battery backup for off-vehicle data review and analysis
12 Unit upgradeable via flash programming
13 Easy to use with friendly menu interface
14 Large, 128 x 64 easy-to-read backlit LCD display with adjustable contrast
15 Hot keys for quick READ and ERASE
16 Detachable and replaceable 16-pin OBD2 cable



Think of the money saved knowing exactly what is wrong with the car and being able to fix it without having to put the car to a garage

Doing the first batch at £72 including Delivery

[neo1]

Is there a list with what other makes of car these work with or is it mainly vauxhall, opel group.

[BigMac]

I have included a list below of supported vehicles
Vehicle Support for OBD-II
Chrysler '96 - Current Year (OBD-II)
Ford '96 - Current Year (OBD-II)
GM '96 - Current Year (OBD-II)
Honda '96 - Current Year (OBD-II)
Nissan '96 - Current Year (OBD-II)
Toyota '96 - Current Year (OBD-II)
All other Asian and European '96 - Current Year (OBD-II)
Does not work with 1990+ OBD II Audi and VW's

The CAN OBD II Code Reader Scanner is compatible with all OBD II compliant vehicles including those equipped with the next-generation protocol Control Area Network (CAN).
For your car or van to be OBD II compliant it must have a 16 pin data link connector and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant too. Please note that this is not compatible with cars manufactured in Australia.
For specific compatibility information please check your vehicle’s user guide or with the manufacturer. Please do bear in mind that while I will do my very best to provide accurate information I cannot be held responsible in the unlikely event that this code reader does not work with a certain car or van.

***Also a quick note I was told that the new generation units would be able to clear airbag lights, but I was misinformed.***