Vectra C, Best Route for Amp Wiring from battery into car

Bren · 25-09-2008, 18:03

Hi, I have just fitted the head unit into my Veccy C and now wish to install some amps, I was wondering where people have fed the power cable into the car from the battery, Is there any quick little spots that can be used already or is it a case of making my own hole by drilling into the bulkhead and feeding it into the footwell?
Any help or suggestions greatly appreciated,
Kind Regards Brendan

***Tom Williams*** · 25-09-2008, 18:45

Bren

If you remove the glovebox - 2 torx 20's at the bottom corners and 3 torx 20's accross the top when the door is open.

Look at the bulkhead, there is a rubber gromit.

Pop a knife in the gromit and the pop your cable through and route around the bay to the battery.

Nice and easy.

Bren · 26-09-2008, 07:33

brill. The glve box had to come bak off anyway for the rca's.
Thanks mate

DavieK · 26-09-2008, 19:29

Took a 40 amp feed from the fusebox in the boot for the amp in my signum