corsa central locking

[nosnova]

Fitted a alarm today and wired the locking negative and it worked for a wile. Then it suddenly stopped working and blew a 20a fuse in the fuse box so i changed that and the locking still doesnt work but does when the ignition is on. This is driving me mad.

Have i blown the cental locking module and douse anyone know where it is on a corsa

[autosparks]

Central locking unit's in the drivers kick panel. If you have wired it up negative pulse, brown/red to lock and brown/white to unlock there's no reason why it should have blown the fuse.

[davey_jack]

Yeah drivers kick panel, remove ecu and its behind it. Sounds to me like you a have got your polaritys the wrong way around mate.

[nosnova]

Thanks for your help guys.... It was the central locking module....i wired it to brown/white and red/yellow and it did work for around 5 locks then module...


im now a happy man but did just spend 40 min programing the bloody toad what a pants way to program the alarm.

[dumdum]

Thanks for your help guys.... It was the central locking module....i wired it to brown/white and red/yellow and it did work for around 5 locks then module...


im now a happy man but did just spend 40 min programing the bloody toad what a pants way to program the alarm.

it is easy when ya get used to it, like after ya programmed 10 or 100 of em!!

[MR_TOAD]

Thanks for your help guys.... It was the central locking module....i wired it to brown/white and red/yellow and it did work for around 5 locks then module...


im now a happy man but did just spend 40 min programing the bloody toad what a pants way to program the alarm.

Well if you spent 40 mins programming alarm then maybe you should have had it fitted by a pro would have been cheaper

Ian

[nosnova]

What have pro`s got to do with it they just stand on street corners. They no nothing about alarms..........LOL......

[Brianx2t]

I have just had exactly the same problem on my GFs Corsa B. I was checking the wiring prior to fitting an alarm, and I think I shorted two wires. The 20A fuse blew, which I replaced, but now the CL only works properly with the ignition switched on.

Have I destroyed the CL module or does it need resetting in some way? Disconnecting the battery for 10 mins didn't help.

Thanks in advance guys