ok, i need advice!!!!

[casper2k5]

im running a
mutant sp280W- 1 10 inch sub 500W rating
a audio plus 480 W- 1 10 inch sub 500W rating
a sony xplod 222W- 2 6 inch subs 300W rating
now my 6X9's are being powered off my sony amp and im wondering do i just crank up the 480W amp and attach the 6X9's to the mutant or do i connect them to the standard speaker line, basically the sony amp makes the 6X9's just subs, no music!!!!

i have a estimated wattage of 1000W so i want it loud!

thanks guys

full install

kenwoods in front, 100W
alpines in rear 100W
2 10" subs in a box 500W each
panasonic head unit 4X45W
magavox 6X9's going for alpine for christmas 400W
and 2 6" legacy subs 300W

how would you wire it up?
any gen?

[casper2k5]

oh i also forgot to say im gonna wire up a splx 150W amp as well, any gen on how to wire up the speakers n subs?

[mystery machine]

ok the 2x 10's and the 2x 6" id run from the amp in stereo (provided it will run 2ohm per channel with the sub filter running.) the 6x9's personaly i would ditch in favor of the alpines in the rear and kenny's in the front. TBH you have way too many speakers for the ability to run them. its not about quantity, its quality you need. the 10's should give a good thump while the 6" will give good midbass. the rear fill will be taken care of by the alpines and the quality up front by the kenny's. ditch the 6x9's, they will be surplus to requirements. when you sell them, put the money toward another 4xch amp for the alpines and kenny's, 2x amps lots of speakers and a good sound.

this should work well, but if you are asking what i would do.... this is it.

[richie00boy]

Yes you have too many speakers.

It's also not good from a sound quality perspective to run two different subs.

I personally think that if you just use what you have you will find it tiring after a while and when you hear a proper quality setup (doesn't need to be expensive mind) you will just think oh fook.

[Trevor]

ok, i need advice!!!!

You also need a proper thread topic.

[casper2k5]

You also need a proper thread topic.

dude i was in a puzzle so i kept the thread title minimal, sorry,

[casper2k5]

i have sorted the sound system more or less thanks to my mate, i have wired the 6X9's to the standard loom, and i have also cranked up the bass, it now good sound and fairly loud!!

i have ditched the 6" subs as suggested they seemed to work in a way that picked up the high freq while the 10" picked up the lows