from the following
i thought about 180-185bhp (??? torque 165lb/ft ???)
from the following...
Coscast 2.0 16v skimmed, polished & ported head by Powerzone.
New lifters, Sckrick 268 cams
2.1 bottom end using 88mm forged Omega pistons.
Compression ratio of 11.8:1
Knife-edged lightened & balanced crank.
New shells.
ARP bolts.
running decent management.....
What do you think it would produce with say 290-300deg cams and on TB's and say a redline of around 8.5k???
i was hoping 230'ish
i thought about 180-185bhp (??? torque 165lb/ft ???)
from the following...
Coscast 2.0 16v skimmed, polished & ported head by Powerzone.
New lifters, Sckrick 268 cams
2.1 bottom end using 88mm forged Omega pistons.
Compression ratio of 11.8:1
Knife-edged lightened & balanced crank.
New shells.
ARP bolts.
running decent management.....
What do you think it would produce with say 290-300deg cams and on TB's and say a redline of around 8.5k???
i was hoping 230'ish