right i have built an XE and put it in my astra cabbie.
i have used the engine loom off the 8 valve because i dint have one for the 16 valve
on the end of the XE injection loom (the rectangle plug with 7 pins in it ) i have took the black yellow wire and put it to an ignition live and took the red one and put it to a perm live then put the blue one to the fuel pump.
now hopefully that should work but no spark and no petrol
i unplugged the ignition module and tested the wires as follows
brown was earthed ok black yellow was live and i tested the black red from the ecu and turned the engine over ond there was a current.
i put the tester on the crank plug pins and got a small current (sensor end not ecu end )
i am not getting a pulse for the fuel pump live ??
i have changed the relays and it did not make a difference i have tried a spark plug directly to the ciol lead and still no spark
am i missing something from looking at it too long or is the ecu nackered and coil ??