Just finished doing the breather mod where you dissconnect the bigger of the two hoses coming off the cam cover, block one half at the inlet, and re-routed the other half round the back of the sfi box with some extra hose to near the right hand side suspension turret.
So far, I have put the end of the hose into an old fanta canlmao and cable tied it there. I am just a little worried that some of the "fumes" will creep into the car and kill me Anyone else done this, or is there a better way to get rid of the fumes?
Hopefully this will cure my "sticking" revs problem. Only time will tell.Oh, its a c20xe by the way
it mainly cures kangerootasticness when slowing down off throttle, but might help the sticking revs.
I have a little K+N filter, but still smell the occasional gases. Best thing to do is route it well towards the front/bottom of the engine bay - but yours might be ok like that as the filters pass loads of gases.
I accidentally took a toke of the breather hose once - foul smell.