induction kit/breather mod?
Ages ago when i tried an induction kit on my c20xe i found it would stall when pulling up to a junction etc(usually after driving fast.
I've currently got my cam cover off so was going to do the breather mod and was wondering if it will stop that problem ?
If so then i'll get another induction kit.
stick with the airbox and panel filter.
Is it still worth doing the mod as seem as i've got the cam cover off?
I'm running drilled airbox and k&n at the mo and sometimes get a little kangerooing when slowing right down when still gear.
it helps in all situations....... but... if it is breathing really badly it would sugest rings are worn
No the cars running well,recorded 165bhp last time on rollers!
So it wont do any harm by doing the mod?
my 16v nova was using a liter of oil a day on my trip to work 50miles..... it still put out 163bhp on the rollers! (but the bloke did have to stop and let the smoke clear between the 2 runs!)
When doing the mod how many/size holes is recommened to be drilled in the plate?
Do you have to do both mods i.e drill holes and divert large pipe to catch tank and breather filter?
heres a pic of mine drilled
did about 40 5mm holes
Mine didnt like the k&n filter till i did the breather mod,matt.
No you dont have to do both,but it wont hurt
I've done the mod, just got to wait to get the car back to put to put it on and try it.
Lee, have you noticed much increase in perfomance?
No mate just easier breathing.Im also doing the one where you block the big one going to the throttle body then routing the pipe from the cam cover to a catch tank/sprite bottle lmao