Is there any way to trick the ecu into letting me have a slightly higher idle speed. Mine is just around 650rpm I guess looking at the rev counter and that just a wee bit to low for my likeing as just about everything that can rattle does so at that speed.
Ideal idle would be 750rpm.
I removed and cleaned the ICV and checked the hoses were clear too. Looked around just in case they left me a ron plug like on the 8v so I could gain 100rpm, but no luck. There is an empty plug by the header tank but I guess that was for low water warning if fitted?
I need an air leak but I guess even that wouldnt work as the engine speed sensor would pick it up and reduce the idle again