I have recentley had KONI shocks and springs fitted.
So after I did a bit of research I found that there were two different types, the irmscher fixed bushes and the adjustable bushes.
I have been told by other MIG members that the irmscher bushes are good for cars lowered upto 25mm and that the adjustable ones are better for cars that have been lowered more than 25mm and with the KONI/EIBACH kit you will definatley be lower than 25mm so I suggest you get the adjustable bushes!
I have the k-mac bushes which I will be having fitted on the weekend but how do you adjust them because the instructions are BULLA and very short, I have looked at a how 2 from another website but it does not say.
Somebody must know how to adjust them so could you tell me!
I thought the instructions were very good, however I did have to help the 4-wheel alignment place to adjust them. The OUTER mounts adjust the Camber Values and the INNER mounts adjust the Toe in/out values.