I will be looking at this GTE again tomorrow which will not start, been through everything so far fuel spark etc etc,
Done a Fault code read and Crank case sensor came up but the engine was not running so assumed that was why.
Now Astra Dan has pointed something out to me:
The ECU light - does it go out when cranking?
if so then ECU should be reading all signal's ok BUT if not and light stays on? does this indicate Crank case sensor problem?
i have checked if the injectors are working using an inj' harness test light and they seem to be ok allthough light is glowing very bright, also have a good spark too - sureley then ECU is working ok?
what would happen if CK sensor wasn't working then? no fuel? no spark? or cause injectors to open not in sequence hence flooding?