Right. Just got the engine all back in, all the sensors fitted to the engine and ready to wire it up. what now???
What needs wiring from the nova loom that is coming from the bulkhead. Obviously alot of the connections are for the lights, but Im left with a mass of wires that were cut when the engine was fitted by amatuers. Will all these wires need connecting up?? Ive been going throiugh the wiring diagrams in the Haynes manual and from what I can tell most of the wires will not be used.
connector with 2 wires in a T shape,
connector with 5 connections (1 not used) in a row and a green rubber, yellow, green, black, white
connector with 4 connections in a square shape near battery
grey, brown, blue, yellow
single round connector
single rectangular connector
Loose wires (blocks cut off)
black, black/yellow, black/red, blue/yellow, blue/green, blue/white, blue, green, red/blue, brown/white.
From the starter motor there are 4 wires. one thick one ( positive battery/altanator )
blue/white, black/red, blue/green.
Coming from the F16 box there are two wires
From the sump there are 2 wires
From the injection loom there are two wires
Single wire connection comin g from injection loom
Like i said many wires may not need connecting, but i have listed all the unknowns, now i need someone to do all the hard work and tell me which ones to join together and which to disregard.
Help wil be very much appreciated, i know its alot to ask.