im installing phase 3.5 today
after doing the ecu mods and pressure regulator i started to fit the wastegate spring, only to find that the brackett for the spring would not fit my uprated actuator, so i decided to refitt the standard actuator for the moment and then fitted the spring.
i could not get more that 5psi when i took the car out, so i took the spring off and tryed again
adjusted the wastegate about 20 turns towards the turbo
still 5 psi
thinking i was adjusting the wastegate the wrong way i turned the nut about 30 times towards the battery
any ideas where ive gone wrong??????