Do you have pic of C20LET intercooler for i see?
my intercooler that i bought drop about 0,5 bar when i running 1 bar of pressure, but when i increased to 1.3 bar the pressure, it drops around 3 bar!!! , because when i removed the intercooler, i keep the same setup of wastegate, and i test the car, and its pressurized 1.6 bar!!
see the pic of mine:
Look here http://www.eds-motorsport.de/indexenglisch.htm
Click on "Products" link.
Then Click on "More engine efficiency" link.
Then "Z20LET-Phase II" link.
Then next to phase II is a "info" link.
After that you can see the standard and EDS Z2.0LET intercoolers.
Thank you friend!
The Z20Let intercooler is not so small, but is much steitch.. mine intercooler is thicker.. maybe the efficience is near..
I was thinking of installing a custom forge FMIC. It measures 680mm X 160mm X 74 mm.
Should be good .
nice look! i think will work good..
Won't be for some time tho . Moneys tight. But i'll report back when my project is all done and finished.