I have put a 20 XE engine in my Cav SRi.
I have wired up most of the XE loom now but the wiring to the coil seems different. The XE one has a four pin connector coming out of the end of the injector rail. The SRi Coil has 2 two pin connectors.
The 4 pin XE connector has:
Red with black trace
The SRi coil connections are:
Red - going to a suppressor or something bolted to the bodywork
My question is, what do I do?
Also, I have a single connector coming out of the XE loom at the end of the injector rail (end with the hall sensor plug and Coil plug) that I cannot find a home for. The connector is a single green wire with a black plug on it.