what injectors to use - C20LET

[mac1976]

ave just about finished the build on my c20let , its had a hone new rings all bearings arp bolts sbd oil pump , head had a very light skim the porus mod done bronze valve guides ported and polished 1mm over sized valves , so am looking f around the 350 bhp mark , will be running a td05 evo turbo but not sure what injectors to go for , either vxrs or saab reds , will be running std management with phz 3.5 or evo 5 chip set to start with . any ideas would be great . cheers mac

[steve jordan]

I'm in the same position as you I sold my Saab reds and bought vxr's as they will be under less pressure, was going to go for evo 5 softwhere but I've herd from people that standard manangement can't cope with the twin scroll design of the td05, there must be a way around this tho mate

[dewismotorsport]

What size hotside do you have? 9.6 or 10.5t? VXR's will do 340bhp but after that you are starting to use them at there max duration. It will work on chip sets but it's not ideal and struggles with the twinscroll, where as aftermarket can over come this

[Nemesis]

I've got some Saab reds here mate £35, free post with your other bits

[dewismotorsport]

Vxr's are 480cc and Saab reds are 440cc

525cc will be much better and will be able to go upto 400bhp on increased fuel pressure, got some for sale for £150 delivered been used for about an hour

[mac1976]

so maybe a should rethink my turbo set up am going to use , what is any other options then ?

[Dale]

i always thought saab reds were 360cc?

[mac1976]

ok so a bought brand new vxr injectors , a went for a garrett t34 and eds ph3.5 so what fuel pressure should a be running

cheers mac