Taking the head off my cav this morning, must be an easier way than the way I'm going !!!!
Anyway the head bolts look like E20 size but my socket doesn't fit in the gap ? special one required or do I need a 1/4 drive one ?
any first hand experience please.
an E14 or 12 will fit ok - the problem is the extension you use may be fouled in some of the holes by the cams - 1/4 one will fit - but then you need an adapter - both of which may break under the sort of torque needed.
best way is to use 1/2 drive throughout, but spend a few quid on a good extension with a thinner shaft.
either that or just take out the cams - with the belt off it's not that much extra work really.