hows it goin?
i recently stripped out an old 1.4 block for a rebuild, my plan was to use the same pistons but change the crank and rods to ones used in the 1.3's,
my friend told me that i should have marked which piston was for the cyclinder it came from, and now that i havent ill have to get a rebore.
is this true?
if so ill get the rebore for 77.8mm 1.2 pistons while im at it, will i have to use new pistons or can i use second hand ones?
how much are new 1.2 pistons and where will i get them?