Vauxhall Owners Forum banner

r1 carb wiring

373 views 4 replies 3 participants last post by  tinxy 
#1 ·
i have got myself a m2 1.6 dizzy with the coil and amplifier it has 3 wires on the dizzy 1 is a + the middle one says 0 an the outside one says - then on the amplifier it has four wires numbered 1 to 4 anyone have any clues how to wire this up or anyone have a old loom for this vacum advance dizzy that would sell it or shed some light on wiring it or were i could obtain the correct connectore from cheers guys james:beer::beer::beer:
 
#3 ·
I can't help you with the wiring side of things, sorry, useless at wiring :doh:

As for the water take-offs, you only need them if you are going to be running heaters. If you do want to run a heater and need the water take-off then I was going to get an alloy hose connector welded in on mine, or you could tap it and fit a union.

Hope that helps
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top