Now that i have got your attention I have a problem with mine.
It gos really well. But sometimes when on full load in the higher gears (3rd 4th 5th) the engines cuts back then fulls again this is a horrible feeling.The ecu ligt doesnt come on.
I think the ecu thinks the boost is to high although its only running 0.6 bar.This happens alot when running this boost but with slight adj of the actuator (0.5bar) it doesnt cut out as often.
I have just had a new turbo unit.But im running a new Wallace actuator.
I have the boost pipe connections as follows
blue- compressor housing
I think that im running these pipes back to front .Athough i have tried running the pipes opposite to that .The result is 1.2 bar boost and large backfire.The boost just seems to build and build.This is not right i know
The actuator isnt set that tight.
Ive been told it might be the actuator having to stronger sping ie mega over boost but struggles to hold boost
P.s if you were at Trax you probably would of heard/saw this on track!