How do i open the ECU to fit some new chips?
your a brave man!
make sure you use one of those anti static mat and wrist band thingys, you dont want to zap the ECU
ok. u need to remove all the little torx screws, then lever all the tabs up and remove the top cover.
errrr thats as far as i ever got, lmao getting the two circuit boards apart is tricky
I persevered for 2 hours, then finaly got them appart. the back pops appart, then u pull it appart on the ribbon, and slide the socket end out.
It works now i have put it back too! lol lmao
The best way to do it is to fold back all the metal fold over bits from the back of the unit. Take the top off. Slide a small flat head screw driver down the end of where the pins are, to try to undo the clips then the thing should just apart.
Can be done in 5 mins max.