Im currently doing an engine conversion which some of you may know about.
Problem is Im on the last bit in the haynes maunal - seperation of gearbox from engine and clutch removal.
Problem I have is that the haynes manual shows me having to remove a circlip and then use 12 splined bit toremove cover bolt, then a pulling thing to undo main input shaft.
Now, I dont have the 12 splined bolt, it doesnt look like the haynes manual, so basically is there and esier way to remove the clutch, or can I pull engine away from gearbox or what any gen?
I am working on a 1.816v ecotec and I belive an F16 gearbox, which dosent look likt the on in the haynes manual they are working on.
Also if it is, do i need the specail tool to remove the input shaft
Any gen greatly appreciated