Looking for ppl that have installed a camber kit or been there when the guy was adjusting it to help out here a bit -
Took mine to be adjusted today but they cannot adjust it enough to get it within the limits stated (2 degrees +- 40 mins)
The most the can get it to is 2.8 degrees and so my rear wheels are starting to scrub in the inner edge
The place reckon the kit has been installed the wrong way and the bushes need to be turned round more.
I called the garage that installed it and they said it was installed properly and the camber was set as per the instructions.
What I really need to know is this - If the kit is installed correctly, will there be enough adjustment available to take it past the 2 degrees limit e.g. 1.5 degrees
Not sure if thats clear. What I am trying to find out is will the kit have a range of say 1.5 - 3 degrees so that the ideal setting is not right at the limit of adjustability.
Going in to the garage on Thursday to have a look at the kit with the guy.