Vauxhall Owners Forum banner

GTE gearbox transducer removal

443 views 3 replies 3 participants last post by  markcox 
#1 ·
Can anyone give me a guide on how to remove the gearbox transducer for the digi dash...Ive undone the 10mm bolt that attaches the plastic bracket onto the gearbox. This doesnt do a lot! Wiggled the whole thing but it doesnt budge. any tips well appreciated.
cheers Mark
 
#2 ·
markcox said:
Can anyone give me a guide on how to remove the gearbox transducer for the digi dash...Ive undone the 10mm bolt that attaches the plastic bracket onto the gearbox. This doesnt do a lot! Wiggled the whole thing but it doesnt budge. any tips well appreciated.
cheers Mark
put that little bolt back in, then just unscrew the transducer leaving the white nylon section attatched to the gearbox. the transducer has a hex section on the end if its too tight to undo by hand.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top