hi, how are you today allllrighty then. I know you did some port grinding on the inlet manifold, did you just match it to a standard inlet man gasket ? The only reason i ask is, i was standing there (with my engine in bits) offering up my current gasket to the head, and the mating face of the jenvey manifold. The gasket is only a eeeency bit too small, yes you read that right, too small for the jenvey manifold AND the ports on my head. I was expecting to have to open my head inlet ports out slightly to match the work you did on the manifold, but no, they are a perfect match. If anything i will have to make the gasket holes slightly bigger, especially at that rounded "nose" shape section on the gasket holes. So, whats the crack ?